background: 7-lif: mg,cu,p (gr-207a) is one kind of thermo-luminescent dosimeters (tld) which can be used in diagnostic radiology and radiotherapy applications. because of having suitable properties such as good sensitivity, small size and being tissue equivalent, thermo-luminescent dosimetry has been one of the most important techniques in medicine over many years. choosing a correct energy fo...

We investigate the optical and thermo-optical properties of amorphous TiO2–Al2O3 thin-film bilayers fabricated by atomic layer deposition (ALD). Seven samples of TiO2–Al2O3 bilayers are fabricated by growing Al2O3 films of different thicknesses on the surface of TiO2 films of constant thickness (100 nm). Temperature-induced changes in the optical refractive indices of these thin-film bilayers a...

resistance spot welding is an important manufacturing process in the automotive industry for assembling bodies. the quality and strength of the welds and, by extension, the body is mainly defined by the quality of the weld nuggets. the most effective parameters in this process are sheet material, geometry of electrodes, electrode force, current intensity, welding time and sheet thickness. the p...

this article reports a study of the thermo-oxidation and biodegradation in the soil of low-density polyethylene/starch films (ldpe/starch) by infrared spectroscopy: films of ldpe/starch blends of different composition (starch content range from 0 to 15% w/w),were prepared and exposed to thermo-oxidation at different temperatures at 80, 90 and 100°c,and buried in the soil of public dump during 3...

low grade diasporic bauxite in the jajarm mine with an a/s (al2o3/sio2) ratio of 2.3 is not usable in the bayer process at jajarm alumina complex. due to the severe interlocking effect between the diaspore and aluminosilicate minerals (chamosite and kaolinite) and iron-containing minerals in a microcrystal matrix, the thermo-chemical treatment, which is independent from micro-mineralogy, was ch...

This article provides a fully analytical approach for nonlinear equilibrium path of rectangular sandwich plates. The core of structure is made of symmetric cross-ply laminated composite and the outer surfaces are piezoelectric actuators which perfectly bonded to inner core. The structure is subjected to electro-thermo-mechanical loads simultaneously. One side of plate is rested on Pasternak typ...

In this research, static stresses analysis of boron nitride nano - tube reinforced composite (BNNTRC) cylinder made of poly - vinylidene fluoride (PVDF) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. The surrounded elastic medium is modelled by Pasternak foundation. Composite structure is modeled based on piezoelectric fiber reinforced composite (PFR...

In this paper, the Chebychev spectral collocation method is applied for the thermal analysis of convective-radiative straight fins with the temperature-dependent thermal conductivity. The developed heat transfer model was used to analyse the thermal performance, establish the optimum thermal design parameters, and also, investigate the effects of thermo-geometric parameters and thermal conducti...

The incidence of cervical cancer in Malawi is the highest in the world and projected to increase in the absence of interventions. Although government policy supports screening using visual inspection with acetic acid (VIA), screening provision is limited due to lack of infrastructure, trained personnel, and the cost and availability of gas for cryotherapy. Recently, thermo-coagulation has been ...

These set of notes describe cavity optomechanics in the presence of additional thermo-optic tuning of the cavity resonance. We find that thermo-optic tuning results in correction factors to both the optical spring and optomechanical gain. In addition there is an overall saturation of the optomechanical coupling. These effects can be large for systems with large static thermo-optic tuning and fa...