ABSTRACT : The analytical study of reinforced concrete simply supported deep beams subjected to two point loads was carried out using finite element method to study the behavior of deep beam by considering flexural stress, flexural strain, and shear stress variations at different sections for various effective lengths to depth ratio and compared with EulerBernoulli Theory. The effective span to...

The project is a continuation from fiscal year 2004-2005. Previous work aimed at developing new analytical tools for analysis of RC beams strengthened with FRP laminates. The models were used to analyze several test specimens of RC beams and to investigate the corresponding failure mode, and whether it is due to CFRP fracture, debonding, or concrete crushing. Current work focused on using the e...

Failures in FRP-strengthened reinforced concrete (RC) members may occur by flexural failures of critical sections or by debonding of FRP plate from the RC beams. Debonding in the FRP/adhesive/concrete interface region may cause a significant decrease in member capacity leading to a premature failure of the system. There is a need for improved knowledge of the debonding processes under mechanica...

In the present paper a fully coupled three-dimensional thermo-hygro-mechanical model for concrete is discussed and used in the numerical studies. The model is formulated in the framework of continuum mechanics based on the principles of irreversible thermodynamics. Distribution of moisture, pore pressure, temperature, stresses and strains are calculated by employing a three-dimensional transien...

This paper presents the application of the genetic algorithm to the design of some common concrete structures in Hong Kong, namely, tall reinforced concrete building frameworks, long-span concrete portal frames and prestressed concrete beams or bridges using spreadsheet. Cross-sectional dimensions of member groups are treated as discrete design variables and the method aims to minimize the weig...

This paper reports the effects of carbon fiber-reinforced polymer (CFRP) length on the failure process, pattern and crack propagation for a strengthened concrete beam with an initial notch. The experiments measuring load-bearing capacity for concrete beams with various CFRP lengths have been performed, wherein the crack opening displacements (COD) at the initial notch are also measured. The app...

Abstract Concrete is an indisputable material for the construction of various types of structures in the modern advancement of civil infrastructures. Concrete is strong in compression but weak in tension and shear. To eliminate those problems, the introduction of fiber was brought in as an alternative to developing concrete in view of enhancing its tensile and shears strength as well as improvi...

Reinforced concrete beams are normally designed as under-reinforced to provide ductile behaviour at failure i.e. the tensile moment of resistance, Mt(0), is less than the moment of resistance of the compressive zone, Mc. Since it is well established that the steel in reinforced concrete beams is prone to corrosion, the residual flexural strength is normally the main concern of asset managers. H...

A large amount of blast furnace slag is generated in China. Most ground granulated blast furnace slag (GGBS) however ends up in low-grade applications. Blast furnace slag, ground to an appropriate fineness, can be used as a partial replacement of cementitious material in concrete. The potential for using GGBS in structural concrete, e.g. concrete beams and columns is investigated at Xi’an Jiaot...