• Bending-shear interaction of stainless steel lipped channels was investigated. FE models were developed for shear, bending, and behaviours. Sections with aspect ratios 1.5 2.0 behave under bending-shear interaction. Codified provisions are too conservative a higher level applied shear force. Proposed equations provide accurate consistent predictions. The response cold-formed channel sections ...

Often unbraced, the stability of steel storage racks may depend solely on the pallet beam to upright connector and on the stiffness of the base plate to floor connection ([1]). This paper presents experimental results from cyclic tests performed on portal beam to upright bolted moment connections intended for cold-formed steel drive-in and drive-through storage racks. In storage racks, portal b...

Advances in the field of computer aided engineering during the last two decades have been quite extensive and have led to considerable benefits to many engineering industries. In the building industry, use of advanced finite element tools has not only allowed the introduction of innovative and efficient building products, but also the development of accurate design methods. High performance com...

The objective of this paper is to provide the stiffness and strength characteristics for coldformed steel stud walls stabilized by sheathing. The primary stability resistance is provided by translational (lateral) stiffness supplied at the fastener locations to the cold-formed steel studs. This paper separates the source of this translational stiffness into two parts: local and diaphragm. To an...

This paper experimentally investigates the cyclic inelastic performance of concentrically braced frames with and without cold formed steel stud ~CFSS! infills designed to laterally restrain braces and delay their buckling. Specimens have either diagonal tube or solid bar braces with and without CFSS and U brackets providing out-of-plane and in-plane buckling restraint. Behavioral characteristic...

This paper is concerned with the determination of optimal sensor locations for structural modal identification in a strap-braced cold formed steel frame based on an improved genetic algorithm (IGA). Six different optimal sensor placement performance indices have been taken as the fitness functions two based on modal assurance criterion (MAC), two based on maximization of the determinant of a Fi...

the welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). a lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. in order to establish the fatigu...

The Welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). A lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. In order to establish the fatigu...

In this study, the effects cold rolling and annealing parameters during thermomechanical processing of the AISI 201LN stainless steel were investigated. The cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. Unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °C was carried out to...