The slurry erosion behaviour of laser clad Fe–Cr–B–Si alloy coatings was investigated at impact angles from 30u to 90u with an increment of 15u, and compared with the slurry erosion behaviour of two laser clad carbide coatings and a non-coated substrate made of AISI 4140 steel. The Fe–Cr–B–Si alloy coatings had slurry erosion resistance. Their overall slurry erosion resistance at impact angles ...

Difunctional boron-containing reactive flame retardant for UV-curable epoxy acrylate oligomer was synthesized from phenyl boronic acid and glycidyl methacrylate. The synthesized reactive diluent was utilized to formulate ultraviolet (UV)-curable wood coatings. The weight fractions of reactive diluent in coatings formulation was varied from 5 to 25 wt % with constant photoinitiator concentration...

This study investigated the effects of layered clay on the thermal curing behavior and tensile properties of resole phenol-formaldehyde (PF) resin/clay/cellulose nanocomposites. The thermal curing behavior of the nanocomposite was characterized using conventional differential scanning calorimetry (DSC) and temperature modulated (TMDSC). The addition of clay was found to accelerate resin curing,...

Composite coatings containing brushite (CaHPO(4). 2H(2)O) and chitosan were prepared by electrochemical deposition. The brushite/chitosan composites were converted to hydroxyapatite/chitosan composites in aqueous solutions of sodium hydroxide. The coatings ranged from approximately 1 to 15% chitosan by weight. Qualitative assessment of the coatings showed adhesion significantly improved over th...

in this study, tio2 and zno nanofilms were prepared by sol-gel spin-coating method. nanofilms were characterized by x-ray diffraction (xrd), energy dispersive analysis of      x-ray (edx), scanning electron microscopy (sem) and field emission scanning electron microscopy (fe-esm). structural and morphological properties of nanofilms were investigated. the average crystalline size of tio2 and zn...

The use of clay materials for the production of emulsion paints was investigated. Two types of clay: White tinged with Purple and Smooth clay (WSP) and Grey Brown and Coarse clay (GBC), were used for the production of Emulsion Clay Paints (ECP). Conventional Chemical pigmented Paint (CP) was also produced as a control. Atomic Absorption Spectroscopy, (AAS) was used to determine the chemical com...

Thin solid lubricating coatings of Pb-Mo-S were deposited on steel substrates via ion-beam deposition. Coating endurance and friction coefficients under dry air sliding conditions were monitored with ball-on-disk tests; additional tribological testing was performed using a ball-on-flat reciprocating test rig to investigate intermediate sliding distances (100-32000 cycles). Rutherford backscatte...

The present work assesses the efficacy of whey protein edible coatings with antimicrobial properties applied to ripened cheese as alternatives to commercial cheese coatings. Whey protein edible coatings were produced from ovine whey protein concentrate (WPC) with lactic acid and natamycin as antimicrobials. Two methods of coating polymerization were performed separately and in combination; the ...

Ni-P and Ni layers multilayer coatings were applied to AZ31 magnesium alloy utilizing electroless and electrodeposition procedures. The aim of the project was to decrease cracks and increase corrosion resistance of the coatings. In order to compare the coatings, the effect of single layer electroless Ni-P coatings with different thicknesses was also investigated. The microstructure and phase co...

The paper discusses the methods of erecting sunk wells and pile foundations, which consist in regulating frictional forces soils: lowering along lateral surface when sinking increasing foundations. developed method provides for application two types effective antifriction coatings surface: cutting edge structure above ledge. At same time, coefficients reducing friction by these various soils ha...