OBJECTIVES The purpose of this study was to investigate the effect of differences in the resin-cement elastic modulus on stress-transmission to ceramic or resin-based composite inlay-restored Class II MOD cavities during vertical occlusal loading. METHODS Three finite-element (FE) models of Class II MOD cavity restorations in an upper premolar were produced. Model A represented a glass-cerami...

A low-pressure plasma surface treatment of polymeric powders was carried out in a circulating fluidized bed (CFB) reactor (10 mm-I.D. × 800 mm-high) with CF4 glow discharge. The effects of solid circulation rate, treatment time and radio frequency (rf) power of plasma on fluorination of high-density polyethylene (HDPE) powders have been determined. X-ray photoelectron spectroscopy (XPS) and the...

OBJECTIVES The purpose of this study was to evaluate the effect of adhesive luting on the fracture resistance of zirconia compared to that of a composite resin and a lithium disilicate glass ceramic. MATERIALS AND METHODS The specimens (dimension: 2 mm × 2 mm × 25 mm) of the composite resin, lithium disilicate glass ceramic, and yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) were p...

The aim of this study was to evaluate the influence of ceramic surface treatments and silane drying temperature on the microtensile bond strength (µTBS) of a resin composite to a lithium disilicate ceramic. Twenty blocks (7x7x5 mm) of lithium disilicate-based hot-pressed ceramic were fabricated and randomly divided into 4 groups: G1: acid etching with 9.5% hydrofluoric acid for 20 s and drying ...

Mn-doped 0.7BiFeO3-0.3BaTiO3 (BFO-0.3BTO+Mn 1% mol) lead-free piezoelectric ceramic were fabricated by traditional solid state reaction. The phase structure, microstructure, and ferroelectric properties were investigated. Additionally, lead-free 1–3 composites with 60% volume fraction of BFO-BTO+Mn ceramic were fabricated for ultrasonic transducer applications by a conventional dice-and-fill me...

Regeneration of the osteochondral interface is critical for integrative and functional cartilage repair. This study focuses on the design and optimization of a hydrogel-ceramic composite scaffold of agarose and hydroxyapatite (HA) for calcified cartilage formation. The first study objective was to compare the effects of HA on non-hypertrophic and hypertrophic chondrocytes cultured in the compos...

OBJECTIVE To compare different surface treatments of lithium disilicate-based ceramic on bond strengths to composite. METHODS Lithium disilicate-based ceramic microbars (1 mm × 1 mm × 6 mm) were produced and abraded using diamond (D) or CoJet sandblasting (C), etched using phosphoric acid (P) or hydrofluoric acid (H) and silanised (S). A total of 12 surface treatments were adopted: D, DP, DH,...

Effective and scalable recycling strategies for the recovery of critical raw materials are yet to be validated solid oxide cells (SOCs) technologies. The current study aimed at filling this gap by developing optimized processes Yttria-stabilized Zirconia (YSZ) from End-of-Life (EoL) SOC components, in view using recovered ceramic phase cell re-manufacturing. A multi-step procedure, including mi...

PURPOSE Evaluating the effect of a proximal margin elevation technique on marginal adaptation of ceramic inlays. METHODS Class II MOD-cavities were prepared in 40 human molars and randomly distributed to four groups (n = 10). In group EN (positive control) proximal margins were located in enamel, 1 mm above the cementoenamel junction, while 2 mm below in groups DE-1In, DE-2In and DE. The grou...

OBJECTIVES To evaluate the two-body wear resistance of different artificial denture teeth when opposed to steatite ceramic balls in a dual-axis chewing simulator. METHODS Artificial denture teeth including the ceramic tooth Bonartic CT, the composite resin tooth Condyloform II NFC, the acrylic resin teeth Bonartic TCR, Orthognath, Polystar Selection, SR Orthotyp DCL, and Vitapan Cuspiform, an...