The effects of thermal radiation, Soret and Dufour parameters on mixed convection and nanofluid flow over a stretching sheet in the presence of a magnetic field are investigated. The flow is subject to temperature dependent viscosity and a chemical reaction parameter. It is assumed that the nanoparticle volume fraction at the wall may be actively controlled. The physical problem is modelled usi...

In this article, developing turbulent forced convection flow of a water-Al2O3 nanofluid in a square tube, subjected to constant and uniform wall heat flux, is numerically investigated. The mixture model is employed to simulate the nanofluid flow and the investigation is accomplished for particles size equal to 38 nm.An entropy generation analysis is also proposed in order to find the optimal wo...

The efficiency of two-phase closed thermosyphon (TPCT) with nanofluid as working fluid under magnetic field effect was investigated experimentally. In this study, silver/water nanofluid with different concentration (20 to 80ppm) is tested. Also, magnetic field with various strength (0.12, 0.35 and 1.2 T) exerted to TPCT by permanent magnet. It was seen that the TPCT heat transfer performance an...

This article describes the effect of thermal radiation on the thin film nanofluid flow of a Williamson fluid over an unsteady stretching surface with variable fluid properties. The basic governing equations of continuity, momentum, energy, and concentration are incorporated. The effect of thermal radiation and viscous dissipation terms are included in the energy equation. The energy and concent...

MHD slip flow and convective heat transfer of nanofluids over a vertical stretching surface subjected to injection has been analyzed. Two types of nanofluids such as Copper-Water nanofluid and Alumina-Water nanofluid are considered for the present study. The Boundary layer equations of motion and energy which are non-linear partial differential equations are reduced to non-linear ordinary diffe...

Our recent work [1] theoretically revealed that speckles can be formed when nanofluids containing a modest volume fraction of nanoparticles are illuminated by a monochromatic laser beam. This paper focuses on the key issues, including the experimental setup, the particle volume fraction of the nanofluid, the flow velocity of the nanofluid and the diameter of the pipe, in measuring the velocitie...

Nanofluids are new generation heat transfer fluids and have opened a new horizon in the areas of heat transfer applications. Nanofluids are prepared by dispersing nano-sized metallic particles in conventional fluids of heat transfer. Heat transfer performance of nanofluid depends primarily on its thermo physical properties like viscosity, thermal conductivity, specific heat and density. Viscosi...

in this paper, overall heat transfer coefficient and friction factor of water based γ-al2o3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. for better dispersion of γ-al2o3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kw and frequency of 35 khz) were implemented. the stabi...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

Carbon nanotube has good electrical properties and a high aspect ratio, which enable it to obtain a high current at a low voltage due to its high field. Due to the life and uniformity of their emission tips, carbon nanotube field emitters are hard to commercialize. A field emitter with a three-dimensional (3D) structure was fabricated in this study to overcome such problems. In the 3D-structure...