نتایج جستجو برای: carbon steel corrosion

تعداد نتایج: 376134  

2014
Jin Xia Wei-Liang Jin

This paper presents an experimental investigation on the crack width induced by the corrosion of reinforcing steel bars in concrete. Reinforcing steel bars with different diameters were corroded using an accelerated test in three types of concrete members, including 24 beams with corroded stirrup and 20 beams with corroded longitudinal reinforcing steel bars. The corrosion patterns and rusts ch...

2016
Ahmed Abdel-Mohti Hui Shen

Abstract: This research examines the performance of strengthened non-uniformly corroded reinforced self-consolidating concrete (SCC) members. This paper focuses on three aspects of concrete including corrosion, concrete cover loss, and repair technique. Up to a 50% corrosion level is considered in this study. Corrosion was experimentally induced and was simulated in other cases. Twenty-six rein...

2017
Huiru Wang Cuiwei Du Zhiyong Liu Luntao Wang De Ding

This study employs potential-monitoring techniques, cyclic voltammetry tests, alternating current (AC) voltammetry methods, and surface characterization to investigate the AC corrosion of cathodically protected X80 pipeline steel. In a non-passive neutral solution at pH 7.2, a sufficiently negative potential completely protects steel at an AC current density of 100 A/m². In an alkaline solution...

Journal: :Nanoscale 2015
Y N Singhbabu B Sivakumar J K Singh H Bapari A K Pramanick Ranjan K Sahu

We report the production of an efficient anti-corrosive coating of cold-rolled (CR) steel in a seawater environment (∼3.5 wt% NaCl aqueous solution) using an oil-based graphene oxide ink. The graphene oxide was produced by heating Aeschynomene aspera plant as a carbon source at 1600 °C in an argon atmosphere. The ink was prepared by cup-milling the mixture of graphene oxide and sunflower oil fo...

Journal: :The spine journal : official journal of the North American Spine Society 2004
Hassan Serhan Michael Slivka Todd Albert S Daniel Kwak

BACKGROUND CONTEXT Surgeons are hesitant to mix components made of differing metal classes for fear of galvanic corrosion complications. However, in vitro studies have failed to show a significant potential for galvanic corrosion between titanium and stainless steel, the two primary metallic alloys used for spinal implants. Galvanic corrosion resulting from metal mixing has not been described i...

Journal: :international journal of iron and steel society of iran 0
a. fattah-alhosseini department of materials engineering, bu-ali sina university, hamedan 65178-38695, iran b. hamrahi department of materials engineering, bu-ali sina university, hamedan 65178-38695, iran

in this work, electrochemical methods such as tafel polarization and electrochemical impedance spectroscopy (eis) were used to study the inhibition efficiency of nettle leaves hydroalcoholic extract as a green corrosion inhibitor of api 5l carbon steel in 0.5 m h2so4 solution. the results showed that the inhibition efficiency was increased with increasing the concentration of the extract and th...

2016
Dapeng Wang

A recent advance in corrosion-resistance technology overcomes the problem of steel corrosion in CO2enriched environments. At an inhibitor concentration of 10 M, the inhibition efficiency exceeded 98% where the steel corrosion rate is decreased by a factor of at least 100.

2017
Zhongying Han Xiaoguang Huang Yinfeng Li

9 In some sour reservoirs and tertiary oil recovery blocks, SO42in solution can cause the corrosion 10 and corrosion fatigue of the sucker rods. In this paper, the corrosion behaviors of super-strength 11 sucker rod FG20 (16Mn2SiCrMoVTiA) steel in the well fluid are investigated by electrochemical 12 measurements, and electron probe micro-analyzer (EPMA) analysis. The results show that FG20 ste...

2013
S. Farina F. Schulz Rodriguez G. Duffó

The present work is a study of the corrosion susceptibility of steel drums in contact with cemented ion-exchange resins contaminated with different types and concentrations of aggressive species. A special type of specimen was manufactured to simulate the cemented ion-exchange resins in the drum. The evolution of the corrosion potential and the corrosion rate of the steel, as well as the electr...

2015
A. Ahmed M. Mhaede M. Wellmann L. Wagner

The effect of several Almen intensities of shot peening on the corrosion behavior, surface roughness, micro hardness profiles, and residual stresses of stainless steel AISI 316 L were investigated. Hydroxyapatite coating (HA) were applied to shot peened materials to improve their corrosion resistance. The corrosion behaviour were studied using potentiodynamic polarization. The electrochemical t...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید