Aligned, open-tipped carbon nanotube arrays of high density and uniformity were synthesized via a flame method on silicon substrates using a nanoporous template of anodized aluminum oxide from which the nanotubes were grown. The diameter and length of the nanotubes are controlled by the geometry of the aluminum oxide template. These results show the feasibility of integration between carbon nan...

Semiconducting nanoparticle tin oxide-based sensors have been prepared with a pressure load of 4, 6, 8, 10 tons and reinforced with carbon nanofibers (CNF) in SnO2 matrix. The SnO2/CNF sensor’s sensitivity for ethyl alcohol has increased by a factor of two, in compared with that of pure SnO2 8-ton pressed sensor with lower response time. These results open the way towards further optimized lowe...

We designed a facile one-pot method to synthesize iron oxide/activated carbon nanotubes (IO/ACNTs) using as-prepared carbon nanotubes (APCNTs) modified by alkali solid-activation. The open-ended CNTs and iron oxide loading could be realized in one step. The resulting IO/ACNT hybrids, as an anode material for lithium-ion batteries (LIBs), exhibited high reversible lithium storage capacity and ex...

The copolymerization of epoxides, including cyclohexene oxide and vinyl-cyclohexene oxide with carbon dioxide are presented. These processes are catalyzed using a homogeneous di-zinc complex that shows good activity and very high selectivities for polycarbonate polyol formation. The polymerizations are investigated in the presence of different amounts of exogenous reagents, including water, dio...

The catalyst activity of fluorite-type oxide, such as ceria and zirconia, for the reduction of sulfur dioxide by carbon monoxide to elemental sulfur can be significantly promoted by active transition metals, such as copper. More than 95% elemental sulfur yield, corresponding to almost complete sulfur dioxide conversion, was obtained over a Cu-Ce-O oxide catalyst with a feed gas of stoichiometri...

The effects of confinement in carbon nanotubes on Fischer-Tropsch (FT) activity, selectivity and lifetime of Carbon NanoTubes (CNTs) supported iron catalysts are reported. A method was developed to control the position of the catalytic sites on either inner or outer surface of carbon nanotubes. TEM analyses revealed that more than 80% of iron oxide particles can be controlled to be position...

Examination of interactions among various substrates and inhibitors reacting with a partially purified nitrogenase from Azotobacter vinelandii has shown that: nitrous oxide is competitive with N2; carbon monixide and acetylene are noncompetitive with N2; carbon monoxide, cyanide, and nitrous oxide are noncompetitive with acetylene, whereas N2 is competitive with acetylene; carbon monoxide is no...

Weld area and weld depth/width ratio can be considered to be of the most important geometrical factors in pulsed laser welding. The effects of carbon dioxide and oxygen additions to the argon shielding gas on the weld properties in pulsed laser welding of low carbon steel is investigated. Presence of carbon dioxide and oxygen up to 10 and 15 percent respectively decreases the weld geometrical f...

Carbon materials and nanomaterials are of great interest for biological applications such as implantable devices and nanoparticle vectors, however, to realize their potential it is critical to control formation and composition of the protein corona in biological media. In this work, protein adsorption studies were carried out at carbon surfaces functionalized with aryldiazonium layers bearing m...

The potential improvement in methane recovery and reaction kinetics from different mixes of potato peel (PP) pig manure (PM) a single stage anaerobic co-digestion/mono-digestion process was investigated laboratory study. highest yield 231 mL/g TCOD added observed the 50:50 mix manure. Compared to mono-digested substrates, co-digestion PP PM at 75:25, 50:50, 25:75 synergistically improved by 17%...