Many parameters influencing corrosion degradation are time variant and the corrosion process is thus subject to temporal variability, the real characteristics of which are commonly neglected in reliability assessment. After a short overview on the quantitative modeling of corrosion loss, a comparison is made between different temporal models of corrosion degradation and the consequences of appl...

High purity Flibe was prepared for corrosion study. Fundamental corrosion experiments in static condition were performed on the structural material for Flibe blanket and Material Research Loop, which is non-isothermal forced convection loop simulating the blanket condition. Corrosion rate for the structural materials in static condition was estimated as small as 0.83-5.4 μm/yr in the high purit...

The effects of disinfection and biofilm on the corrosion of cast iron pipe in a model reclaimed water distribution system were studied using annular reactors (ARs). The corrosion scales formed under different conditions were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM), while the bacterial characteristics of biofilm on th...

About a century ago, researchers first recognized a connection between the activity of environmental microorganisms and cases of anaerobic iron corrosion. Since then, such microbially influenced corrosion (MIC) has gained prominence and its technical and economic implications are now widely recognized. Under anoxic conditions (e.g., in oil and gas pipelines), sulfate-reducing bacteria (SRB) are...

Title of Dissertation: CREEP CORROSION OVER PLASTIC ENCAPSULATED MICROCIRCUIT PACKAGES WITH NOBLE METAL PREPLATED LEADFRAMES Ping Zhao, Doctor of Philosophy, 2005 Dissertation Directed By: Dr. Michael Pecht, Professor, Department of Mechanical Engineering Field failures were observed to be caused by the bridging of corrosion products across lead fingers. This phenomenon was identified as creep ...

A corrosive environment leaves in-service conductive structures prone to subsurface corrosion which poses a severe threat to the structural integrity. It is indispensable to detect and quantitatively evaluate subsurface corrosion via non-destructive evaluation techniques. Although the gradient-field pulsed eddy current technique (GPEC) has been found to be superior in the evaluation of corrosio...

Corrosion protection of metals and alloys is a prime activity of technical, economic, environmental, and aesthetical significance. The use of inhibitors is one of the best choice of combating metals and alloys against detoriation against environmental impact. The toxicity of organic and inorganic corrosion inhibitors to the environment has provoked the search for ecofriendly corrosion inhibitor...

Corrosion is a deterioration of a metal due to reaction with environment. The use of corrosion inhibitors is one of the most effective ways of protecting metal surfaces against corrosion. Their effectiveness is related to the chemical composition, their molecular structures and affinities for adsorption on the metal surface. This review focuses on the potential of ionic liquid, polyionic liquid...

An effective way of assessing corrosion in pipelines before serious consequences occur is to use tools that can predict the future of a pipeline through an understanding of its present state and the mechanisms of corrosion. In this work electrochemical methods such as liner and tafel polarization resistance were used to evaluate corrosion. Most metal corrosion occurs via electrochemical reactio...

The modes of erosion-corrosion are diverse and may vary from being "erosiondominated", where erosion of metal is the dominant process, to "corrosion-dominated", where erosion of oxide scale is the dominant process. The intermediate situation in which erosion of transient oxide is the predominant process is termed "erosion-corrosion-dominated" and describes the regime in which continual formatio...