Cr(VI) is considered to be potentially carcinogenic to humans. Removal of Cr(VI) ions from aqueous solution under different conditions was investigated using activated alumina (AA) and activated charcoal (AC) as adsorbents. Batch mode experiments were conducted to study the effects of adsorbent dose, contact time, pH, temperature and initial concentration of Cr(VI). Results showed that the adso...

The efficiency of activated parthenium hysterophorous as an adsorbent for removing Pesticide mixture from water has been studied. Batch mode adsorption experiments have been conducted by varying pH, concentration, adsorbent dose and contact time. Pesticide removal was pH-dependent and found to be maximum at pH 2.0. The maximum removal of pesticides was achieved within 100 min after the start of...

The removal of tributyltin (TBT) from artificial seawater using nZnO, activated carbon and nZnO/activated carbon composite was systematically studied. The equilibrium and kinetics of adsorption were investigated in a batch adsorption system. Equilibrium adsorption data were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherm models. Pseudo first- and second-order...

Spent coffee grounds were evaluated for adsorption efficiency in the removal of pesticide paraquat from its aqueous solutions. The influence of the adsorbent mass, agitation time, paraquat concentration and pH have been investigated in the batch sorption mode. Adsorption capacity (mg/g) has been found to be 27.87 ± 1.57 mg/g, while the removal efficiency has resulted of 32.25 ± 1.79 %. Adsorpti...

The activated carbon produced from olive stones was chemically activated using sulfuric acid, (OS-S), and utilized as an adsorbent for the removal of Cr(VI) from aqueous solution in the concentration range 4-50 mg/L. Adsorption experiments were carried out in a batch process and various experimental parameters such as effect of contact time, initial chromium ion concentration, carbon dosage, an...

Multiwall carbon nanotubes (CNTs) and iron oxide impregnated carbon nanotubes (CNTs-iron oxide) were investigated for the adsorption of hazardous toluene and paraxylene (p-xylene) from aqueous solution. Pure CNTs were impregnated with iron oxides nanoparticles using wet impregnation technique. Various characterization techniques including thermogravimetric analysis, scanning electron microscopy...

Phenol removal from wastewater is very widely studied area of research. The practical approach for phenol removal by adsorption involves study of batch adsorption and more importantly the fixed bed operation. In the present study, various aspects of fixed bed adsorption for phenol have been discussed. The review of research carried out on this topic is presented. The phenol removal in fixed bed...

This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorpti...

In this study, the removal of mercury ions by cellulose of Acetobacter xylinum was investigated in the synthetic and chlor-alkali wastewater. Biofilms of Acetobacter xylinum were grown in laboratory column bioreactors. The biofilms were continuously treated with sterile synthetic model wastewater or nonsterile, neutralized chloralkali wastewater.The extent of adsorption was studied as function ...

Nano-ZnO was employed for the adsorption of 4C2NP from aqueous solutions in batch equilibriumexperiments to investigate its adsorption properties. The quantity of 4C2NP adsorbed onto nano- ZnOsurface was measured by UV-Vis spectrophotometer. The effects of contact time, adsorbent dose, pH, andinitial concentration of 4C2NP were investigated. The adsorption found to be strongly influenced by all...