Growth of reactively co-sputtered Al2O3 layers and micro-structuring using reactive ion etching have been optimized, resulting in channel waveguides in the as-deposited layers with optical propagation losses as low as 0.21 dB/cm. For active functionality, Erdoped Al2O3 layers have also been deposited by co-sputtering from a metallic Er target. At relevant dopant levels (~10 cm) lifetimes of the...

X-ray photoelectron spectroscopy was applied to study the hydroxylation of a-Al2O3 (0001) surfaces and the stability of surface OH groups. The evolution of interfacial chemistry of the a-Al2O3 (0001) surfaces and metal/a-Al2O3 (0001) interfaces are well illustrated via modifications of the surface O1s spectra. Clean hydroxylated surfaces are obtained through waterand oxygen plasma treatment at ...

We have developed a two-step growth scheme for single-crystal Al2O3 tunnel barriers. The barriers are epitaxially grown on single-crystal rhenium (Re) base electrodes that are grown epitaxially on a sapphire substrate, while polycrystalline Al is used as the top electrode. We show that by first growing an amorphous aluminum (Al) oxide layer at room temperature and crystallizing it at a high tem...

An egg-shell Pd/Al2O3 catalyst showed higher activity than a regular Pd/Al2O3 catalyst in the partial oxidation of methane to syngas, but a common problem of this reaction is the catalyst deactivation on stream. We attempted to modify the egg-shell catalyst via impregnation with some metal oxide additives. Although the addition of MgO did not show any beneficial effect, the addition of CaO and/...

This paper is concerned with the investigation of the capability of Detonation sprayed Ni-Cr And Al2O3 13TiO2 coatings to improve the tribological and mechanical properties of grey cast iron. The present study describes and compares the mechanical and tribological properties of NiCr and Al2O3 13TiO2 D-Sprayed coatings deposited on two different substrates (GI250 and GIHC) Experiments using a tr...

Silicon carbide (SiC) has shown considerable potential for ultraviolet (UV) photode‐ tectors due to its properties such as wide band gap (3.26 eV for 4H-SiC), high break down electric field and high thermal stability. 4H-SiC-based UV photodetectors such as Schottky, metal-semiconductor-metal (MSM), metal-insulator-semiconductor (MIS) and avalanche have been presenting excellent performance for ...

Molecular structure and vibrational frequencies of the novel surface enolic species intermediate on Ag/Al2O3 have been investigated by means of density functional theory (DFT) calculations and in situ infrared spectroscopy. The geometrical structures and vibrational frequencies were obtained at the B3P86 levels of DFT and compared with the corresponding experimental values. Theoretical calculat...

The present work intends to explain why ultrathin Al2O3 atomic-layer-deposited (ALD) on the back contact with rectification and tunneling effects can significantly improve the performance of CdTe solar cells in our previous work [ Liang , J. ; et al. Appl. Phys. Lett. 2015 , 107 , 013907 ]. Herein, we further study the mechanism through establishing the interfacial energy band diagram configura...

A new touch sensor device has been demonstrated with molybdenum disulfide (MoS2) field effect transistors stacked with a piezoelectric polymer, polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE). The performance of two device stack structures, metal/PVDF-TrFE/MoS2 (MPM) and metal/PVDF-TrFE/Al2O3/MoS2 (MPAM), were compared as a function of the thickness of PVDF-TrFE and Al2O3. The sensitivity...

We demonstrate a novel atomic layer deposition (ALD) process to make high quality nanocrystalline titanium dioxide (TiO2) and zinc oxide (ZnO) with intermediate Al2O3 layers to limit the crystal size. The waveguide losses of TiO2/Al2O3 nanolaminates measured using the prism coupling method for both 633 nm and 1551 nm wavelengths are as low as 0.2 ± 0.1 dB/mm with the smallest crystal size. We a...