نتایج جستجو برای: 55cr3 steel

تعداد نتایج: 81277  

2006
S. L. Chan

A short review for design consideration of two common materials used in facade and curtain walling is presented. The characteristics of light-weight facade enveloping a building are different from the conventional steel or concrete structures. Glass cannot crack like concrete and it is much more brittle than steel. Aluminum involves many buckling modes similar to but more common than steel. Owi...

2012
Daniel C. H. Schleicher Bernhard G. Zagar Yung-Sheng Chen

In this chapter a particular image processing problem existing in quality assurance for steel industry is addressed. Since the quality standards in steel industry are ever increasing, even steel industry starts to use machine vision systems to monitor their product quality. In case of steel coils a particular figure of merit in quality is the roundness (ellipticity) or lack thereof of the coil....

2017
Wenjing Yang Qihui Wang Ke Xu Yanjun Yin Hebin Bao Xueming Li Lidan Niu Shiqi Chen

The biodegradable inhibitors, which could effectively reduce the rate of corrosion of carbon steel, were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The mixed-type inhibitors extracted from Eriobotrya japonica Thunb. leaf exhibited excellent inhibition performance, and the inhibition efficiency for carbon steel reached 90.0% at 298 K in hydroch...

2012
R. Ganesan K. Thanasekaran

This paper evaluates the treatment of textile dyeing wastewater by using steel scrap as adsorbents and heterogeneous catalysts for Modified Fenton oxidation. The efficiency of the process was explored as a function of the experimental parameters: pH, hydrogen peroxide concentration and Steel scrap content. The composites with high steel scrap content were effective to adsorb colour and COD in t...

2014
R. KRUZEL

M. Suliga, R. Kruzel, Czestochowa University of Technology, Czestochowa, Poland In the paper the influence of bidirectional bending on breaking force of steel cord has been assessed. Tests were carried out under laboratory conditions on three types of cord. It was found that bidirectional bending of steel cord cause the deterioration of strength properties and weakening of steel cord as a resul...

2003
Mikio Takemoto Hideo Cho

AE monitoring from various types of stress corrosion cracking (SCC) has been conducted for the past 15 years in our laboratory. This paper discusses AE results of active-path dissolution-type SCC of austenitic stainless steel in chloride solution and fused salt, fluoride and polythionic acid solutions, brass in ammonia (Mattosson's solution), and carbon steels in nitrite solution. Transgranular...

2008
Wei LI Guang DAI Feifei LONG Peng JIANG

According to the characteristics of low-carbon steel pitting acoustic emission signal, one new characteristic analysis-WICA is proposed. The main idea of WICA is that based on the independent component analysis blind source separation technology as well as the wavelet transformation decomposition technology, proposed determines the low-carbon steel pitting source number according to the energy ...

2017
ANURAG SHARMA PREETI CHOUDHARY ANIL KUMAR VARSHNEY

The inhibitive and adsorptive properties of Sesmum indicum eco-friendly oil for stainless steel corrosion in hydrochloric acid was investigated using weight loss technique as well as electrochemical technique. The result has proved that the oil is excellent inhibitor for stainless steel in hydrochloric acid. The inhibition efficiency of oil for stainless steel increased with increase the amount...

2011
W. WALKE

The purpose of the tests was to determine whether and how sterilisation process of samples made of AISI 316L stainless steel with diff erent strain impacts their corrosion resistance. Tests were made on steel samples that had been electrochemically polished in order to assure proper surface roughness. In order to evaluate the infl uence of sterilisation on physical and chemical properties of st...

2014
K. Pazhanivel G. B. Bhaskar

Investigations on flexural and tensile properties of GFRP laminates influenced by stainless steel wire reinforcement were carried out as a novel approach. Plain GFRP laminates and GFRP laminates reinforced with stainless steel wires at different depth with various pitch distances were fabricated by hand layup method. The composite specimens reinforced with steel wires were exposed to low freque...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید