Three nano-porous NiO samples with high specific surface area were prepared by a simple hydrothermal method under homogeneous precipitation conditions using CTAB as a template and urea as the hydrolysis controlling agent. This study was done to determine the effect of different anions (acetate, nitrate and chloride) present in the precursor salts on the morphology and pseudocapacitance behavior...

CeO2 and Y2O3-stabilized zirconia (YSZ) are two typical candidates for electrolyte materials in solid oxide fuel cells attributed to their high ion conductivities. However, the conductivities of these materials are closely connected with high temperatures. Therefore, it is important to develop electrolyte materials which can conduct oxygen ions at lower temperatures. Recent experiments have sho...

Nanocrystalline partially stabilised zirconia (PSZ) and yttria-fully stabilised zirconia (YSZ) powders were prepared by solution combustion process. Nanocrystalline nature of the powders was confirmed by XRD and TEM. Nanocomposite Ni/PSZ and Ni/YSZ films were electrodeposited from a suspension of nanoparticles in nickel sulfamate solution. The strengthening of the nanocomposite due to nanoparti...

A new composite system, Ba(Zr0.07Ti0.93)O3 (BZT93) ceramic/NiO nanoparticles, was fabricated to investigate the effect of NiO nanoparticles on the properties of these composites. M-H hysteresis loops showed an improvement in the magnetic behavior for higher NiO content samples plus modified ferroelectric properties. However, the 1 vol.% samples showed the optimum ferroelectric and ferromagnetic...

In this study, radio frequency magnetron sputtering was used to deposit nickel oxide thin films (NiO, deposition power of 100 W) and titanium-doped zinc oxide thin films (TZO, varying deposition powers) on glass substrates to form p(NiO)-n(TZO) heterojunction diodes with high transmittance. The structural, optical, and electrical properties of the TZO and NiO thin films and NiO/TZO heterojuncti...

A low-cost manufacturing procedure has been developed for the fabrication of planar anode-supported solid oxide fuel cell including only two thermal treatments. This method is also environmental-friendly since slurries are water based and use non-toxic additives. Slurries were formulated by optimizing powder quantity, minimizing organic compounds while controlling their stabilities rheological ...

The shortcomings at elevated operation temperatures of the standard material yttria-stabilized zirconia (YSZ) for thermal barrier coatings (TBCs) have initiated many research activities seeking alternatives. One candidate is the pyrochlore lanthanum zirconate La2Zr2O7 (LZ), which is phase-stable to its melting point. At the same time, it shows a lower thermal conductivity and a lower sintering ...

In this paper, the formation of ZrO₂ and yttria-stabilised-zirconia (YSZ) aqueous colloidal systems via microwave assisted hydrothermal synthesis is studied. Microwave synthesis allows a fast screening of the influence of different parameters such as time and temperature. The temperature varied from 140 °C up to 180 °C and the used reaction time varied from 5 min up to 1 h. The synthesised zirc...

Cu-based, solid oxide fuel cell (SOFC) electrodes were modified by electrodeposition of Co. The addition of only 5-vol% Co by electrodeposition significantly improved the thermal stability compared to either Cu-ceriaYSZ, Cu-Co-ceria-YSZ, or Co-ceria-YSZ electrodes prepared only by impregnation with much higher metal loadings, demonstrating that electrodeposited metal layers form metal films wit...