Ti6Al4V alloys are widely used in chemical plants, automobile, aerospace industries and medical applications (bone, dental) because of its high specific strength. But, it has poor wear resistance. In the present investigation, duplex coatings were employed to enhance the mechanical and tribological properties. WC-Co Ceramic coatings were deposited on Ti6Al4V substrate with different thicknesses...

350 The excessive differential wear of teeth and restorative materials has significant deleterious effects on the biologic, functional, and esthetic condition of the masticatory system. However, controlled investigations of numerous factors that might influence tooth and restoration wear have been mainly laboratory studies, the findings of which might not correlate with either the physical prop...

17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...

Prolonging wear life of amorphous carbon films under vacuum was an enormous challenge. In this work, we firstly reported that amorphous carbon film as a lubricant layer containing hydrogen, oxygen, fluorine and silicon (a-C:H:O:F:Si) exhibited low friction (~0.1), ultra-low wear rate (9.0 × 10(-13) mm(3) N(-1) mm(-1)) and ultra-long wear life (>2 × 10(6) cycles) under high vacuum. We systematic...

Tribological characteristics of fine-grained WC–8 wt%Ni with different surface finishing conditions corresponding to sequential wire electrical discharge machining (wire-EDM) or grinding were investigated by performing dry reciprocating sliding experiments on TE77 pin-on-plate equipment with WC–6 wt%Co as mating material. Surface finishes and wear surfaces were characterized using surface topog...

In dry sliding conditions, polytetrafluoroethylene (PTFE) composites can form thin, uniform, and protective transfer films on hard, metallic counterfaces that may play a significant role in friction and wear control. Qualitative characterizations of transfer film morphology, composition, and adhesion to the counterface suggest they are all good predictors of friction and, particularly, wear per...

Titanium alloys are extensively used in various fields of engineering, medicine, aerospace, marine due to its excellent mechanical properties. Its usage is more pronounced today in the field of biomedical implants due to its superior biocompatibility, corrosive resistance and high strength to weight ratio. It has poor abrasive wear resistance due to high coefficient of friction and low thermal ...

ti-6al-4v titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. in the current research, the effect of aging treatment on microstructure and wear behavior of ti-6al-4v titanium alloy was investigated. pin on disk wear test was applied to assess the wear behavior. specimens were first solut...

The wear of polymer-based materials is connected to their brittleness. We have previously formulated a quantitative definition of brittleness in terms of elongation at break and storage modulus for thermoplastic polymers. We provide a formula connecting brittleness to viscoelastic recovery (healing) after sliding wear. Our model fits a selection of ten thermoplastics representing several classe...

In this paper, a wear model is introduced for the mild wear present in boundary-lubricated systems protected by additive-rich lubricants. The model is based on the hypothesis that the mild wear is mainly originating from the removal of the sacrificial layer formed by a chemical reaction between the base material and the additive packages present in the lubricant. By removing a part of this laye...