Zr, Nb, and Ta as alloying elements for Ti alloys are important for attaining superior corrosion resistance and biocompatibility in the long term. However, note that the addition of excess Nb and Ta to Ti alloys leads to higher manufacturing cost. To develop low-cost manufacturing processes, the effects of hot-forging and continuous-hot-rolling conditions on the microstructure, mechanical prope...

The effect of hydrogen on the corrosion and stress corrosion cracking of the magnesium AZ91 alloy has been investigated in aqueous solutions. Hydrogen produced by corrosion in water diffuses into, and reacts with the Mg matrix to form hydride. Some of the hydrogen accumulates at hydride/Mg matrix (or secondary phase) interfaces as a consequence of slow hydride formation and the incompatibility ...

Ageing of 75% cold rolled Al-6Mg alloy with ternary 0.4 wt% scandium and quaternary zirconium and titanium has been carried out. Alloy samples are naturally, isochronally and isothermally aged for different time and temperatures. Hardness values of the differently processed alloys have been measured to understand the ageing behavior of Al-6Mg alloy with scandium and quaternary zirconium and tit...

In spite of excellent corrosion resistance, good ductility and low cost of AISI 316 austenitic stainless steel, the low hardness and poor mechanical charecteristic of material restricts its applicability in several industrial services. To improve upon mechanical properties AlFeCuCrCoNi-WC10 high-entropy alloy coatings were deposited via laser cladding on austentic stainless steel AISI 316 subst...

In dispersed two-phase flow, experimental data indicate that the effective drag force on individual dispersed elements∗ is strongly influenced when the dispersed phase is present at high volume fractions. This appears to be true whether the DPEs are solid or fluid (i.e. droplets or bubbles). The paper first reviews the literature relating to the modelling of the drag force in densely dispersed ...

E. Olejnik, A. Janas, B. Grabowska, M. Kawalec, AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland Casting technology was applied and research was carried out on two alloys based on the Ni3Al phase with variable carbon content of 0,2 and 1,25 wt. % C, respectively. Resistance to abrasive wear, friction coeffi cient and Vickers microhardness were determined....

The microstructure and martensitic transformation in the Ni-36.3Al-0.1Y (in at.%) alloy were investigated after ho~nogenisation and plastic deformation by hot upsetting at 1100°C. The alloy exhibited large, recrystallised grains of the Ni-A1 P phase wit11 spl~erical precipitates inside the grains and a thin layer of other phases located at the grain boundaries. The SEM and EDX analysis showed t...

the term nanosteels is called to some special steels consisting of nanosize phases (i.e. ferrite, cementite, and austenite), grains, and carbides (e.g. vanadium and m2c) produced by nanotechnology. it is proof that exotic physical, mechanical, and magnetic properties can be obtained from nanostructured steels. fabrication methods of nanostructure steels can be divided into two main categories, ...

Precipitate size and number density are two key factors for tailoring the mechanical behavior of nanoscale precipitate-hardened alloys. However, during thermal aging, the precipitate size and number density change, leading to either poor strength or high strength but significantly reduced ductility. Here we demonstrate, by producing nanoscale co-precipitates in composition-optimized multicompon...

The valence states of Mg-Al alloys are compared to those of reference materials (pure Mg and Al metals, and intermetallics). Two methods based on X-ray emission spectroscopy are proposed to determine the phases and their proportion: first, by analyzing the Al valence spectra of the Mg-rich alloys and the Mg valence spectra of the Al-rich alloys; second, by fitting with a linear combination of t...