in this research, zeolite-tio2 nanocomposite was prepared for degradation of dibenzothiophene as a typical aromatic organosulfur compound of transportation fuels.the synthesized tio2 was immobilized on the surface of clinoptilolite by solid state dispersion (ssd) method. the nanocomposite was then characterized by xrd, ftir, tem and sem techniques. photodegradation of dibenzothiophene in n-hexa...

Titanium dioxide has been widely used for photo-catalytic and self-cleaning activities. In this study, TiO2 /SiO2 /Co nanocomposite was prepared by sol-gel method in the presence of Polyvinyl Pyrrolidone (PVP), and Hydroxyl Propyl Cellulose (HPC) as additives, and characterized by IR spectra, Scanning Electron Microscopy (SEM), Energy Dispersive Analytical X-Ray (EDAX), and X-Ray Diffraction (X...

Article history: Received 17 July 2015 Revised 18 December 2015 Accepted in revised form 19 December 2015 Available online 21 December 2015 The main challenges of biological implants are suitable strength, adhesion, biocompatibility and corrosion resistance. This paper discusses fabrication, characterization and electrochemical investigation of anodized Ti6Al4V without and with a hydroxyapatite...

New donor–acceptor polymers containing disilanobithiophene (DSBT) as the donor and pyridine or pyrazine as the acceptor with or without a thiophene spacer were prepared. The polymers showed UV-vis absorption maxima at lmax 1⁄4 488–526 nm, which were red-shifted relative to those of model monomers dithienylpyridine and dithienylpyrazine (lmax 1⁄4 352–375 nm), indicating the efficient conjugation...

We report on the fabrication of CdSe quantum dot (QD) sensitized electrodes by direct adsorption of colloidal QDs on mesoporous TiO2 followed by 3-mercaptopropionic acid (MPA) ligand exchange. High efficiency photoelectrochemical hydrogen generation is demonstrated by means of these electrodes. The deposition of ZnS on TiO2/CdSe further improves the external quantum efficiency from 63% to 85% a...

in this work firstly zno nanoparticles were synthesized via a simple precipitation method. at the second step titanium dioxide and silicon dioxide shell were synthesized on the core. for preparation zno-tio2-sio2 the sol product was calcinated at 500 ºc for 2h. properties of the product were examined by x-raydiffraction pattern (xrd), scanning electron microscope (sem) and fourier transform inf...

Cadmium sulfide (CdS) and silver sulfide (Ag2S) nanocrystals are deposited on the titanium dioxide (TiO2) nanocrystalline film on indium tin oxide (ITO) substrate to prepare CdS/Ag2S/TiO2/ITO photoelectrodes through a new method known as the molecular precursor decomposition method. The Ag2S is interposed between the TiO2 nanocrystal film and CdS nanocrystals as an energy barrier layer and a li...

the photocatalytic degradation of two anionic azo dyes acid red88 (ar 88) and acid orange 7 (ao7) was investigated in aqueous solution using a tio2-containing hydrogel and uv light. the ph-sensitive hydrogel poly (styrene-alt-maleic anhydride) (psma), was synthesized and crosslinked in the presence of melamine and tio2 nanoparticles which results in entrapment of tio 2 into the melamine-grafted...

Nanocrystalline TiO2 films, surface modified with Al3+, were manufactured by depositing a TiO2 suspension containing small amounts of aluminum nitrate or aluminum chloride onto conducting glass substrates, followed by drying, compression, and finally heating to 530 degrees C. Electrodes prepared with TiO2 nanoparticles coated with less than 0.3 wt % aluminum oxide with respect to TiO2 improved ...

Heterogeneous TiO2/Cu2O nanocomposite was synthesized for photocatalysis through surface impregnation in conjunction with the environmentally friendly soft chemical reduction strategy. The detailed structural, compositional, optical and photoelectrochemical properties of the obtained products are analyzed by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Vis diffuse refl ec...