By introducing a thin ZnO layer as an optical spacer, we have demonstrated that inserting this layer between an active layer and a reflective electrode results in a re-distribution of the optical electric field inside bulk heterojunction solar cells. A theoretical analysis by optical modeling showed that the thin ZnO layer could shift the position of the maximum of the electric field into the a...

To make a uniform AlOx barrier layer in tunnel junctions, a thin layer of Al is often sputtered first and then oxidized. In this study, we sputtered a thick layer of Al onto Fe3O4 and then employed high resolution transmission electron microscopy and x-ray energy dispersive spectroscopy to investigate the interfacial microstructures. Two new layers have been found and investigated at the Al/Fe3...

The dependence of optical modal gain and loss on GaN:Eu growth temperature is reported. GaN:Eu thin films were grown on Si substrates with AlGaN transition and cladding layers at temperatures ranging from 600 degrees C to 850 degrees C. The modal gain and loss in the GaN:Eu layer were a strong function of the optically active Eu atomic concentration and of the interface quality between the acti...

Interfacial topological states are a key element of interest for topological insulator thin films, and their properties can depend sensitively on the atomic bonding configuration. We employ in situ nonresonant and resonant surface x-ray scattering to study the interfacial and internal structure of a prototypical topological film system: Bi2Te3 grown on Si(111). The results reveal a Te-dominated...

The Cu(In,Ga)(S,Se)(2)Mo interface in thin-film solar cells has been investigated by surface-sensitive photoelectron spectroscopy, bulk-sensitive x-ray emission spectroscopy, and atomic force microscopy. It is possible to access this deeply buried interface by using a suitable lift-off technique, which allows us to investigate the back side of the absorber layer as well as the front side of the...

Many applications of thin films necessitate detailed information about their thicknesses and sound velocities. Here, we study SiO2/LiNbO3 layer systems by picosecond photoacoustic metrology and measure the sound velocities of the respective layers and the film thickness of SiO2, which pose crucial information for the fabrication of surface-acoustic-wave filters for communication technology. Add...

We report the origin of the effect of nanoscale confinement on the local viscosity of entangled polystyrene (PS) films at temperatures far above the glass transition temperature. By using marker x-ray photon correlation spectroscopy with gold nanoparticles embedded in the PS films prepared on solid substrates, we have determined the local viscosity as a function of the distance from the polymer...

Thermal interfacematerials (TIMs) are crucial components of high density electronics and the high thermal conductivity of graphite makes this material an attractive candidate for such applications. We report an investigation of the in-plane and through-plane electrical and thermal conductivities of thin thermal interface layers of graphite nanoplatelet (GNP) based composites. The in-plane elect...

The measured and calculated propagation constant of coplanar waveguide (CPW) on low-resistivity silicon (1 cm) with a micromachined polyimide interface layer is presented in this paper. With this new structure, the attenuation (decibels per centimeter) of narrow CPW lines on low-resistivity silicon is comparable to the attenuation of narrow CPW lines on high-resistivity silicon. To achieve thes...