STATEMENT OF PROBLEM Clinicians use the NiTi coil springs frequently for its appropriate mechanical properties. PURPOSE The aim of this study was to determine the effect of recycling and autoclave sterilization on the unloading forces of NiTi closed coil springs. MATERIALS AND METHOD Fourteen NiTi closed coil spring with the length of 9mm were selected. Each coil was stretched to a peak ext...

The aim of the present study was to evaluate the effect of thermocycling on the bond strength between the surface of the glass-infiltrated alumina ceramic In-Ceram (VITA) and the Panavia F resin cement (Kuraray CO.). Four 5x6x6mm In-Ceram blocks were obtained. One of the 6x6mm faces of each block was conditioned with Cojet - System (tribochemical silica coating, ESPE-3M) and then luted under a ...

Introduction: This in-vitro study investigates the bond strength of different zirconia composites with three different modern adhesive systems after artificial aging using thermocycling and water storage. Methods: A total of 90 specimens of zirconia (InCoris, Sirona, Germany, Bernsheim) were ground using a 165 μm grit rotating diamond disc. Thirty specimens were additionally treated with either...

PURPOSE The purpose of this study was to formulate and characterize experimental antibacterial fluoride-releasing sealants and compare them with commercial sealants for fluoride release, recharge, adhesion, and microleakage. METHODS Two experimental sealants (Exp-1, Exp-2) containing a synthesized antibacterial fluoride-releasing monomer and fluoride-releasing filler were formulated. Exp-2 al...

The purpose of this study was to evaluate the shear bond strength (SBS) of amalgam to dentin using four different bonding systems. Eighty extracted human third molars of approximately the same size were selected. Teeth were sectioned parallel to the occlusal plane to expose mid-coronal dentin, and then onehalf of each tooth was embedded in acrylic resin. Four bonding systems were used following...

To evaluate the effects of cold light bleaching on the color stability of four restorations using a thermocycling stain challenge. 160 specimens (10 mm in diameter and 2 mm thick) were fabricated from 4 composite resins (Gradia Direct-A, Z350XT, Premisa, and Précis) and divided into 4 subgroups. Color was assessed according to the CIEL*a*b* color scale at baseline, after the first cycle of blea...

BACKGROUND Dentinal hypersensitivity (DH) is a diagnostic and therapeutic problem that is now appearing more frequently in modern dentistry. The aim of this work was to elaborate formulation of a new, original desensitizing preparation with prolonged action based on the knowledge of similar commercializations and to compare their performance in vitro. METHODOLOGY The analyses were performed w...