The effect of molybdenum (Mo) on the microstructure and creep behavior of nominally Ti–24Al– 17Nb (at.%) alloys and their continuously reinforced SiCfiber composites (fiber volume fraction = 0.35) was investigated. Constant-load, tensile-creep experiments were performed in the stress range of 10–275 MPa at 650 C in air. A Ti–24Al–17Nb–2.3Mo (at.%) alloy exhibited significantly greater creep res...

The creep behaviors of TA2 and R60702 at low and intermediate temperature were presented and discussed in this paper. Experimental results indicated that an apparent threshold stress exhibited in the creep deformation of R60702. Meanwhile, the primary creep phase was found as the main pattern in the room temperature creep behavior of TA2. Compared with exponential law, the power law has been pr...

Despite decades of intensive research, an entirely satisfactory constitutive relation for creep in concrete is still unavailable, even for working stress levels [I]. The rate-type creep laws with internal variables [2], although rather effective for numerical creep analysis of large structural systems, seem to be incapable of describing the aging phenomena without at least partially violating s...

An instrument for measuring the creep response of a material maintained under a controlled environment of temperature and vapor pressure is described. The temperature range of the instrument is 20-250 degrees C while the range of vapor pressure is 0-1 atm. Data are presented for tests conducted on this instrument with Nafion, a perfluorinated ionomer developed by DuPont and used as a membrane i...

High operating temperatures can have very deleterious effects on the long-term performance of high-Cr, creep-resistant steels used, for example, in the structural components of power plants. For the popular creep-resistant steel X20CrMoV12.1 we analysed the processes of carbide growth using a variety of analytical techniques: transmission electron microscopy (TEM) and diffraction (TED), scannin...

The creep behavior of nanocellulose films and aerogels are studied in a dynamic moisture environment, which is crucial to their performance in packaging applications. For these materials, the creep rate under cyclic humidity conditions exceeds any constant humidity creep rate within the cycling range, a phenomenon known as mechanosorptive creep. By varying the sample thickness and relative humi...

In this article, experimental results on the effect of CO2 sorption and desorption on the creep response of polycarbonate (PC) are presented. Tensile specimens machined from PC sheets were exposed to CO2 and the absorbed gas mass fraction ranged from 0.045 to 0.12. The creep/creep recovery response of as-received PC, saturated PC, and saturation-cycled PC was characterized. It was found that th...

Creep can be dangerous for electromechanical, electronic and electrical connections, networks and devices. Recently, the metal matrix composites (MMC’s) are generally used for designing the electromechanical and electrical systems and devices due to their advantages. Therefore, analysis of the creep behavior is necessary and important for safe designing the fibrous composite devices. For achiev...

The tensile creep behavior is extremely important in crack prediction and stress analysis of concrete. The main objective is investigating the effects of the silica fume on the tensile basic creep of early-aged concrete. The effect of silica fume on tensile creep was studied using lever-type tensile creep tester. Silica fume amount by weight of total cementing material was 0%, 5%, 10% and 15%. ...

In this study, a novel multiscale combined creep strain and creep rupture model is proposed. By comparing to experimental data it was shown that the model provides accurate creep rupture predictions for unidirectional off-axis specimens. The creep strain model provides accurate predictions within the confines of the linear elastic restrictions used in its development. This creep strain and cree...