AbstructThis application paper addresses the control of a nonminimum-phase plant with variable large orders and delays. The process concerned is full penetration gas tungsten arc welding. Based on an analysis of accepted adaptive algorithms, the generalized predictive control algorithm presented by Clarke et al. is selected as the principal control strategy. An adaptive generalized predictive d...

Arc welding is an important joining process widely used in many industrial applications including production of automobile, ships structures and metal tanks. In welding process, the moving electrode causes highly non-uniform temperature distribution that leads to residual stresses and different deviations, especially buckling distortions in thin plates. In order to control the deviations and in...

D. Bajic, University of Montenegro, Faculty of Mechanical Engineering, G. Vladimirovich Kuzmenko, E.O. Paton Electric Welding Institute, National Academy of Sciences Ukraine, I. Samardžić, J.J.Strossmayer university of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia The paper presents up-to-date achievements in application of a new method of arc welding of various rail profi l...

welding produces residual stresses and distortion, having detrimental effect on structure integrity and service performance of the welded pipe joints. this paper investigates residual stresses and distortion during gas metal arc welding (gmaw) of pipes of schedule 40 and 60, nominal diameter 100mm and 200mm and thickness 8mm and 10mm with ansi flanges of class 300#. welding parameters including...

Due to lack of comprehensive experimental studies on welding processes, and to better understand the mechanisms behind these processes, especially the weld pool shape variations suspected due to Marangoni Effect or surface tension shear stress, a two-dimensional simulation model was developed to study the physics of gas tungsten arc welding (GTAW). Experimental spot-welds on Ti-5Al-5Mo-5V-3Cr w...

In this investigation, an attempt is made to study the tensile and microstructural impact of different gas tungsten arc (GTA) welding processes pulsed current, constant magnetic oscillation welded AZ31B magnesium metal joints. These techniques were chosen because they have potential produce welds with high strength excellent integrity. Five joints produced using each approach, one employing a u...

The aim of this study was to compare the mechanical strength of different joints made by conventional brazing, TIG and laser welding with and without filling material. Five standardized joining configurations of orthodontic wire in spring hard quality were used: round, cross, 3 mm length, 9 mm length and 7 mm to orthodontic band. The joints were made by five different methods: brazing, tungsten...

the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...

In this study, microalloyed steels were joined by using the submerged arc welding method at different welding currents of 350 A, 400 A and 450 A. The effects of selected welding parameters on the microstructure and mechanical properties of welded materials were investigated. Tensile tests and microhardness measurements were performed. Microstructural changes have been identified in the welding ...

Tailor-made blanks are sheet metal assemblies with different thicknesses and/or materials and/or surface coatings. A monolithic sheet can be machined to make the required thickness variations that is referred as tailor machined blanks. Due to the thickness variation in tailor machined blanks, laser bending of these blanks is more complicated than monolithic plates. In this article, laser formin...