Analysis of a thermoelectric generator (TEG) in an ocean thermal energy conversion (OTEC) application is presented. An analytic model is developed for describing the heat exchanger-TEG interactions. This model is used to illustrate limitations of applying conventional fixed junction temperature assumptions to systems experiencing significant temperature drops across the heat exchanger surfaces....

A-Type heat exchangers are used to meet required heat load with minimum duct dimensions in air-conditioning applications. This greatly reduces the air-conditioning system footprint in residential and commercial applications. The angle and tube spacing of the A-type heat exchangers should be optimized for minimum duct size and maximum heat load. However, existing air side heat transfer and press...

This paper provides a review on the fouling mechanism and its effect onto the performance of finned tube heat exchangers in HVAC systems. Fouling tends to degrade the performance of heat exchangers by decreasing the heat transfer coefficient and increasing the air-side pressure drop across the heat exchangers. Air side fouling depends on a number of factors on the air side, including type and c...

Leakage in heat exchanger tubes can result in unreliable products and dangerous situations, which could cause great economic losses. Along with fast development of modern acoustic detection technology, using acoustic signals to detect leakage in heat exchange tube has been gradually accepted and considered with great potential by both industrial and research societies. In order to further advan...

The paper presents two methods that are aimed at detecting fouling in cross-flow heat exchangers under normal operating conditions, using measurements that can easily be obtained, i.e. inlet and outlet temperatures and the mass flows of the hot and cold fluids. The methods are a) a physical method that is based on number of transfer units (NTU) relations and b) a black box model that is estimat...

1. The anatomy of the counter-current heat exchanger of skipjack tuna is described and the pattern of blood flow is analysed. 2. The pattern of blood flow is from the dorsal aorta, through the exchanger to segmental arteries to the tissues, from the tissues to segmental veins and back through the exchanger to the post-cardinal vein. 3. The vessels in the exchanger are about the same size as sys...

water and energy are key commodities utilized in the process industries.water minimization and energy minimization have been studied separately. in this paper, a new systematic design methodology has been developed for the simultaneous management of energy and water systems that also feature maximum re-use of water. in addition to allowing re-use of water, issues about heat losses inside unit o...

The objective of this paper is to evaluate and optimize the performance of 1 kW integrated heat exchanger module for new generations of air cooled heat exchangers. The first objective is to minimize the ratio of the header frontal area to the entire heat exchanger frontal which will help to reduce the header size. The second objective is to minimize the pressure drop for the entire heat exchang...

In industrial environments, the heat exchanger is a necessary component to any strategy of energy conversion. Much of thermal energy used in industrial processes passes at least one times by a heat exchanger, and methods systems recovering thermal energy. This survey paper tries to presents in a systemic way an sample control of a heat exchanger by comparison between three controllers LQR (line...

one way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. in the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. in this work, the performance of water / iron oxide nanofluid in a double...