Computational simulation of steam flow and heat transfer in power plant condensers on the basis of the threedimensional mathematical model for the flow through porous media is presented. In order to solve the mathematical model of steam flow and heat transfer in power plant condensers, the Streamline Upwind Petrov-Galerkin finite element method is applied. By comparison of the results of simula...

in this research, water and steam absorption behavior and also effect of maleic anhydride polypropylene (mapp) on these behaviors in wood fiber-polypropylene composite were compared. for this purpose, the composites were manufactured from 60% fibers and 40% polypropylene in presence and absence of ma. the oven dried samples with dimensions of 2.5×2.5×1 cm were immersed in distilled water and ex...

Abstract The production of activated carbon from eucalyptus wood chips by steam activation in a 2000 kg batch intermittent rotary kiln with continuous carbonization–steam process conducted at 500 °C to 700 was studied. products were characterized FTIR, SEM–EDS, Raman spectroscopy, and BET analysis. Percent yields, iodine number, methylene blue number the produced materials measured as well. It ...

In this work, char gasification of two coals (i.e., Shenfu bituminous coal and Zunyi anthracite) and a petroleum coke under a steam and CO2 mixture (steam/CO2 partial pressures, 0.025–0.075 MPa; total pressures, 0.100 MPa) and CO2/steam chemisorption of char samples were conducted in a Thermogravimetric Analyzer (TGA). Two conventional kinetic models exhibited difficulties in exactly fitting th...

This paper presents steam temperature models for steam distillation pilot-scale (SDPS) by comparing Pseudo Random Binary Sequence (PRBS) versus Multi-Sine (M-Sine) perturbation signal Both perturbation signals were applied to nonlinear steam distillation system to study the capability of these input signals in exciting nonlinearity of system dynamics. In this work, both linear and nonlinear ARX...

The most common wood species in Sweden, and one of the most important renewable raw materials in Northern Europe, is Norway spruce (Picea abies). Today, it is utilized mainly for sawed timber and the production of pulp and paper. A modern kraft pulp mill that produces bleached pulp has a material efficiency of about 40-45%, and the final product contains mainly cellulose. The other components o...

This article suggests the value in a broad view of STEAM beyond arts-integration, as well as the potential of design thinking for STEAM. Despite much interest in STEAM it is often challenging for many teachers to integrate into their teaching of school subject matter. I suggest that as an interdisciplinary crossroads, design thinking provides a natural bridge between the arts, sciences, and oth...

Various aspects affecting the steam economy of a raw sugar mill are discussed. Process and prime mover steam requirements are evaluated for a new 600 ton canelhour factory currently under construction at Felixton, and options for achieving a level of steam economy where fibre can be supplied to a downstream paper mill with the appropriate fuel economy are evaluated. The necessity to allow for f...

Devolatilization of solvents from viscous polymer cement is realized through stripping of solvent with steam in stirred vessels or directly by evaporating the solvent from the polymer. The later so-called direct desolventizing is realized in extruders or high volume kneaders. All 3 methods involve additional energy to drive out solvent either by partial pressure through additional steam (steam ...

High surface area activated carbon fibers (ACF) have been prepared from bamboo by steam activation after liquefaction and curing. The influences of activation temperature on the microstructure, surface area and porosity were investigated. The results showed that ACF from bamboo at 850 °C have the maximum iodine and methylene blue adsorption values. Aside from the graphitic carbon, phenolic and ...