Filtration of the drilling mud is one of it's most important parameters, especially when drilling-in producing formation. Decrease of filtration characteristics allows reducing both solid and liquid phases's penetration zone into the formation. The study of the effect of the weighting-bridging agent's fractional composition on the filtration rate allows selecting of optimal composition of the s...

Accumulative roll bonding (ARB) was used to fabricate the Cu-Zn multilayer and Cu-Zn solid solution. A lamellar structure with the hardness of about 130 VHN was formed after eight ARB cycles. Following to the suitable heat treatment, a solid solution with a uniform microstructure and hardness of about 57 VHN was produced. The dominant wear mechanism in the ARB processed multilayer was found to ...

response surface methodology was applied to determine the optimum processing conditions that lead to maximum water loss, weight reduction and minimum solid gain as well as water activity during osmotic dehydration of carrots. temperature (30-50?c), processing time (120-240 min), glucose syrup de=42 (30-50% w/w) and salt (5-15%) concentrations were the factors investigated with respect to water ...

banana is one of the most important tropical fruit from commercial and industrial point of view. this fruit is an extremely perishable fruit which can not be preserved using freezing process. therefore, drying is the most promising method. conventional air drying is energy intensive and consequently expensive method. pre-treatments can be used to reduce the initial water content or to modify th...

Phase equilibria of AZ91D Mg alloys for nonflammable use, containing Ca and Y, were carried out by using FactSage® and FTLite database, which revealed that solid solution treatment could be performed at temperatures from 400 to 450C. Solid solution treatment of AZ91D Mg alloy without Ca and Y was successfully conducted at 420C and supersaturated microstructure with all beta phase resolved into ...

Thermal behavior of various solid feldspars are different, namely those of bivalent cations show no change in the distribution of Al and Si atoms, whereas feldspars of univalent cations become more disordered with raising temperature. In the latter case Al atoms migrate from the sites they occupe at low temperatures and interchange positions with the Si atoms. At high temperatures (but stil...

Solid solutions of Ag-Cu were prepared via ball milling process, for about 5-30 h. The Cu-20at%Ag and Cu-3.64at%Ag composition were investigated by X-ray diffraction technique. It was realized that the solid solubility level could be increased by increasing the initial solute content in the mixture. In addition, shifts in peak positions of silver and copper were observed with milling time. The ...

In this paper, we propose the new Ta3N5:Ti3O3N2 solid solution as a promising water-splitting photocatalyst. Using first principles computations, we study the phase stability, band gap, and band edge positions of the solid solution. The results suggest that the solid solution can likely be synthesized, and has a band gap lower than both its end members. The minimal band gap may be around 2.0 eV...