The design for the array was inspired by the origami flasher model (Lang, 1997; Shafer, 2001). Figure 1 shows the array prototyped from Garolite and Kapton film at the CubeSat scale. Prior work demonstrated that rigid panels like solar cells could successfully be folded into the final stowed configuration without requiring the panels to flex (Zirbel, Lang, Thomson, & al., 2013). The design of t...

This paper represents design methodology of novel phased array antenna and its radiation pattern of 100 elements linear phased array for highly efficient microwave power transmission (MPT) which will be focused on ground based receiving station for microwave power transmission from Space Solar Power Satellite (SSPS) system. Taking different ratio between antenna element spacing, d and wavelengt...

This paper presents modeling and simulation for the PV cells, modules, and array, and building of blocks based on MATLAB / Simulink software package. The main aim of this work is the improvement of the PV solar cell simulator based on a two-diode model. This model is more accurate than the single diode model especially at low insolation levels; therefore this will gives more accurate prediction...

Solar energy is one of the most abundant sources of renewable energy for the future. This solar energy can be extracted by PV system. Many methods for PV installation are carried out, such as roof top PV system, dam top PV system; floating PV, canal top PV system etc. In canal top system, PV panels are placed above the water canal which saves installation area and reduces evaporation loss. The ...

A radial p-n junction solar cell based on vertically free-standing silicon nanowire (SiNW) array is realized using a novel low-temperature and shallow phosphorus doping technique. The SiNW arrays with excellent light trapping property were fabricated by metal-assisted chemical etching technique. The shallow phosphorus doping process was carried out in a hot wire chemical vapor disposition chamb...