We report the growth of graphene at a low temperature using the cold wall chemical vapor deposition technique (CWCVD). Few layered (~6-8 layers) graphene were grown on nickel-coated silicon with acetylene as the precursor gas. The advantage of the combination of the acetylene (as a carbon feedstock) and the nickel catalyst was the lowering of the graphene growth temperature. Nickel coated silic...

We report on the design, operation, and performance of a thermal evaporation chamber capable of evaporating organic thin films. Organic thin films are employed in a diverse range of devices and can provide insight into fundamental physical phenomena. However, growing organic thin films is often challenging and requires very specific deposition parameters. The chamber presented here is capable o...

The addition of mist to a flow of steam or gas offers enhanced cooling for many applications, including cooling of gas turbine blades. The enhancement mechanisms include effects of mixing of mist with the gas phase and effects of evaporation of the droplets. An impinging mist flow is attractive for study because the impact velocity is relatively high and predictable. Water droplets, less than 1...

Abstract Film cooling is a critical gas turbine technology to reduce heat loads on the combustion chamber and vanes blades. To improve film performance, trenched configurations where holes are connected by cross-stream slot in surface have been developed. In this study, for first time, we experimentally examine influence of mainstream turbulence large vortices flows. We apply an imaging techniq...

We study light scattering off rectangular slot nano antennas on a metal film varying incident polarization and incident angle, to examine which field vector of light is more important: electric vector perpendicular to, versus magnetic vector parallel to the long axis of the rectangle. While vector Babinet's principle would prefer magnetic field along the long axis for optimizing slot antenna fu...

Optical forces in guided-wave nanostructures have recently been proposed as an effective means of mechanically actuating and tuning optical components. In this work, we study the properties of a photonic crystal optomechanical cavity consisting of a pair of patterned Si3N4 nanobeams. Internal stresses in the stoichiometric Si3N4 thin-film are used to produce inter-beam slot-gaps ranging from 56...

We design and fabricate a 320 nm slot for an electro-optic (E-O) polymer infiltrated silicon photonic crystal waveguide. Because of the large slot width, the poling efficiency of the infiltrated E-O polymer (AJCKL1/amorphous polycarbonate) is significantly improved. When coupled with the slow light effect from the silicon photonic crystal waveguide, an effective in-device r(33) of 735 pm/V, whi...

The critical field of a thin superconducting film with a blind circular hole is found theoretically. It is shown that the value of the critical field is sensitive to the bottom thickness, but the orbital momentum, i.e., the number of vortices which nucleate inside the hole, is not sensitive. A simple boundary condition for a steplike thin film is derived and used for comparative numerical analy...

In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...