The densification behavior, microstructure and mechanical properties of bulk TiB₂-based ceramic composites, fabricated using the spark plasma sintering (SPS) technique with elements of (Fe-Ni-Ti-Al) sinter-aid were investigated. Comparing the change of shrinkage displacement of pure TiB₂ and TiB₂-5 wt% (Fe-Ni-Ti-Al), the addition of elements Fe-Ni-Ti-Al into TiB₂ can facilitate sintering of the...

Results about the vitrification of several hazardous iron-rich industrial wastes (from productions of Zn and Cu metals, as well as EAFD and MSWA) and the usage of obtained glasses for synthesise of sintered glass-ceramics are summarises. It is shown that the appropriated method of sinter-crystallization mainly depends on the crystallization trend of used glasses. When the parent composition is ...

The problem of microwave enhanced mass transport in solids remains an area of great interest and continued research in the microwave processing of materials. Many researchers have reported that microwave sintering of materials reduces the time and often the temperature of the sintering procedure [1]. The mechanisms of the mass transport enhancement phenomenon by microwaves termed “Microwave Eff...

Transmission electron microscopy and scanning transmission electron microscopy studies were conducted in situ on 2–5 nm Pt and 10–40 nm Ag nanoparticles to study mechanisms for sintering and to measure relevant sintering kinetics in nanoscale particles. Sintering between two separated particles was observed to initiate by either (1) diffusion of the particles on the sample support or (2) diffus...

This study focuses on the fabrication and microstructural investigation of Cu–TiH2–C and Cu–Ti–C nanocomposites with different volume fractions (10% and 20%) of TiC. Two mixtures of powders were ball milled for 10 h, consequently consolidated by spark plasma sintering (SPS) at 900 and 1000 ◦C producing bulk materials with relative densities of 95–97%. The evolution process of TiC formation duri...

Superalloy substrates coated with plasma sprayed CoNiCrAlY bond coats and yttria-stabilized zirconia top coats have been subjected to a high heat flux in a controlled atmosphere chamber. The sintering exhibited by the top coat under these conditions has been studied and compared with the behavior observed during isothermal heating, both when attached to the substrate and when detached. Sinterin...

Ultra-low effective oxide thickness (EOT) Ge MOS devices with different HfON/HfAlO stacks and sintering temperatures were investigated in this work. Both the reduced gate leakage current and reliability improvement can be achieved by either a suitable gate dielectric stack or sintering temperature. As a whole, a 0.5 nm thick HfAlO in gate dielectric stack and a sintering temperature at 350 C ar...

High-chromium vanadium and titanium magnetite (HCVTM) sinter has poor properties. The coke ratio has an important effect on the behavior of HCVTM sintering as it affects the mineral phases in the high-chromium vanadium and titanium sinter (HCVTS) via changing the sintering temperature and atmosphere. In this work, the sintering behavior of HCVTM mixed with varying coke ratios was investigated t...

Residue powders resulting from cutting and machining operations in slate quarries were processed by a press and sintering route to manufacture ceramic products such as flooring and roofing tiles. The first part of this work consisted of a laboratory study carried out by uniaxially pressing the powders to shape and sintering in air using a muffle type furnace. A plan of sintering experiments was...