the research was conducted in order to determine the bending stress, young’s modulus, shearing stress, and shearing energy of safflower stalk as a function of moisture content and stalk region. the bending forces were measured at different moisture contents and the bending stress and the young’s modulus were calculated from these data. for measuring the shear forces, the stalk specimens were se...

The Propose of this paper is to introduce a new model for crude oil fouling in preheat trains of crude distillation unit. The experimental results of Australian light crude oil with the tube side surface temperatures between 200-260 oC and fluid velocity ranged 0.25 to 0.4m/s were used. The activation energy of chemical reaction depends on the surface temperature has been calcula...

background: in this study, ferrate (vi) and ultraviolet (uv) radiation were employed to remove hydrogen sulfide from municipal wastewater resulting in a reduction in chemical oxygen demand (cod). although ferrate (vi) and uv have been used individually for the removal of a few pollutants from urban and industrial wastewater, there exists no study to investigate the effectiveness of simultaneous...

the shear strength and shear energy per unit area, as well as the force and energy required for picking flowers, are important parameters in the design and development of harvesting mechanisms. in this study, shear strength and shear energy per unit area of saffron (crocus sativus l.) stems were determined at different bevel angles and shear velocities. the force and energy required for picking...

Fibre-packed coalescers are widely employed to remove drops from liquid-liquid dispersions. This work has as its objective a quantitative correlation of drop removal with$ltration variables. Photo-etched screens, which were positioned perpendicular to the flow, served as geometrically defined representations sf jibrous media. Forward-angle light scattering was employed to measure the extent of ...

the steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

Gas bubbles present a frequent challenge to the on-chip investigation and culture of biological cells and small organs. The presence of a single bubble can adversely impair biological function and often viability as it increases the wall shear stress in a liquid-perfused microchannel by at least one order of magnitude. We present a microfluidic strategy for in-plane trapping and removal of gas ...

OBJECTIVES The purpose of this study was to evaluate the effect of either eugenol-containing or eugenol-free temporary cement removal by excavator or sandblasting on the shear bond strength of ceramic luted to dentin. METHODS A self-etching primer system, Panavia F 2.0, Kuraray Medical (PF2), and a total-etch bonding system, Excite/Variolink II, Vivadent (EXV), were used. One hundred and fort...

BACKGROUND Chronic changes in blood flow stimulate arterial remodeling, which contributes to the maintenance of vascular homeostasis. Experimental studies suggest that remodeling represents a response to local changes in endothelial shear stress and is nitric oxide-dependent. METHODS AND RESULTS To investigate determinants of outward arterial remodeling in humans, we measured ulnar artery flo...