objectives: micromechanical retention of resin cements to alloys is an important factor affecting the longevity of metal base restorations. this study aimed to compare the bond strength and etching pattern of a newly introduced experimental etchant gel namely nano met etch with those of conventional surface treatment techniques for nickel-chrome (ni-cr) and high noble alloys.  materials and met...

(HIPing), can improve the tribo-mechanical properties of cobalt-based alloys. The alloy selected for this investigation had a nominal wt.% composition of Co-30Cr-14W-1C, which is similar to the composition of the commercially available Stellite®4 alloy. The Hot Isostatic Pressed (HIPed) alloy had a much finer microstructure than the cast alloy, which showed a typical hypoeutectic dendritic micr...

Objectives: This study is undertaken to evaluate the dependence of bond strength of 100% fresh nonprecious alloy and the combination of 50% recast (used) alloy and 50% fresh alloy with three different veneering ceramic material. Materials and methods: To evaluate the shear bond strength between new and recast alloy nonprecious Ni-Cr alloy (System KN®, Adentatec, Germany) was used with three dif...

PURPOSE The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution's tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each ...

We have recently observed the formation of ultracold rubidium molecules in the triplet ground state at a temperature of about 90 μK inside a Rb MOT [1]. The most efficient formation has been found to go through photoassociation to the excited 0g (P3/2) state and successive radiative decay to the a Σu ground state [2]. In this way up to 10 mol/s are produced. These molecules remain in the MOT re...

The authors propose a protocol for creating triple-NOON states with ultracold rubidium atoms subject to periodic driving modulation that facilitates the collective tunneling of other sites. They show chaos-assisted can reduce time without significantly affecting purity superposition.

A new kind of biomedical shape memory TiNiAg alloy with antibacterial function was successfully developed in the present study by the introduction of pure Ag precipitates into the TiNi matrix phase. The microstructure, mechanical property, corrosion resistance, ion release behavior in simulated body fluid, cytotoxicity and antibacterial properties were systematically investigated. The typical m...

Effects of B and Cr additions on magnetostriction and the mechanical properties of polycrystalline Fe83Ga17 alloy were investigated. Small addition of B increased magnetostriction of Fe83Ga17 alloy slightly, and improved the room temperature ductility and tensile strength significantly. The elongation and tensile strength of the (Fe83Ga17)99B1 alloy increased to 3.56% and 548MPa compared with t...