Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...

Fe-Cr-Al alloy nanopowders were successfully prepared by electrical wire explosion method in ethyl alcohol media. The formation of FeCr-Al alloy nanopowder was monitored by X-ray diffraction. The alloy powders have spherical shape and nanometer size. The alloy powders prepared by the electrical wire explosion method have main crystal structures of bcc Fe-Cr alloy. The geometric mean diameter an...

Inks comprised of metallic Fe or Ni powders, an elastomeric binder, and graded volatility solvents are 3D-printed via syringe extrusion and sintered to form metallic cellular structures. Similar structures are created from Fe2O3 and NiO particle-based inks, with an additional hydrogen reduction step before sintering. All sintered structures exhibit 92–98% relative density within their struts, w...

Graphene/Cu composites were fabricated through a graphene in-situ grown approach, which involved ball-milling of Cu powders with PMMA as solid carbon source, in-situ growth of graphene on flaky Cu powders and vacuum hot-press sintering. SEM and TEM characterization results indicated that graphene in-situ grown on Cu powders guaranteed a homogeneous dispersion and a good combination between grap...

A new low-temperature method to produce (InxGa1−x)2O3 (x 4 0.1, 0.2, and 0.3) powders with high purity, high chemical homogeneity and improved crystallinity in the as-synthesized state has been developed. This procedure produced finely divided powders through an exothermic reaction between the precursors. The process starts with aqueous solutions of In(NO3)3 and Ga(NO3)3 as the precursors and h...

Mango processing produces significant amount of waste (peels and kernels) that can be utilized for the production of value-added ingredients for various food applications. Mango peel and kernel were dried using different techniques, such as freeze drying, hot air, vacuum and infrared. Freeze dried mango waste had higher antioxidant properties than those from other techniques. The ORAC values of...

Hydroxyapatite (HAP) is a biocompatible ceramic that is currently used in a number of current biomedical applications. Recently, nanometre scale forms of HAP have attracted considerable interest due to their close similarity to the inorganic mineral component of the bone matrix found in humans. In this study ultrafine nanometre scale HAP powders were prepared via a wet precipitation method unde...

Heterostructured powders composed of microcrystalline (mc-) BaTiO3 and SrTiO3 cores coated with nanostructured (ns-) TiO2 shells were prepared using a solegel method. The influences of annealing temperature, coating thickness, cocatalyst loading, and core size on photocatalytic hydrogen production were experimentally determined. The amount of hydrogen produced depends on the annealing temperatu...

A simulated workplace study was conducted to investigate the relation between inhalation exposure and dustiness determined with a rotating drum dustiness tester. Three powders were used in the study, i.e. magnesium stearate, representing a very dusty powder, and aluminium oxide and calcium carbonate, representing low and very low dusty powders, respectively. Two scenarios of handling small volu...

As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient's therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ing...