Using a modified chemical vapor deposition (CVD) method, we have prepared a class of new graphene foams (GFs) doped with nitrogen, boron or both. Nitrogen-doped graphene foams (N-GFs) with a nitrogen doping level of 3.1 atom% were prepared by CVD of CH4 in the presence of NH3 while boron-doped graphene foams (B-GFs) with a boron doping level of 2.1 atom% were produced by using toluene and triet...

In this research, we physically foamed semicrystalline polylactic acid filled with montmorillonite, carbon nanotubes, and halloysite nanoparticles. the case of polymer foams, their density compressive strength are important parameters. Although specific calculated as ratio two is a good indicator use polymeric few researchers for classification. We have shown that presence nanoparticles has pos...

Nickel titanium (NiTi) foams were made by combustion synthesis of powders with the help of ZrH2 as foaming agent and TiB2 as endothermic agent. In this paper, we investigated the effect of elemental powder size on the foaming. The powder size of Ni and Ti affected the ignition temperature of the combustion reaction, cell morphology and microstructure of the foams. The cell morphology of the foa...

The incorporation of brown algae into biopolymer beads or foams for metal sorption has been previously reported. However, the direct use of these biomasses for preparing foams is a new approach. In this study, two kinds of porous foams were prepared by ionotropic gelation using algal biomass (AB, Laminaria digitata) or alginate (as the reference) and applied for Pb(II) sorption. These foams (ma...

Metallic foams and lattice materials are compared in terms of properties and underlying deformation mechanisms. Lattice materials can be made to possess mechanical properties which are similar to, or exceed, those of foams depending upon the nodal connectivity. Scaling laws are reviewed here for the Young’s modulus and yield strength of foams and lattice materials, and the damage tolerance of e...

abstract: this paper presents the results of studies concerned with the preparation of fresh food foams based on egg white and various hydrocolloids including iranian gum tragacanth, guar and xanthan gums at different concentrations (0.002-0.040% w/w). the basic physical parameters of the obtained foams such as overrun, stability and morphology of gas bubbles were measured. viscosity measuremen...

Composite materials fabricated using hollow microspheres are called syntactic foams. Particulate filler composites such as syntactic foams, consisting of glass microballoons and epoxy resin, are desirable for applications that require high compressive and impact strengths and low thermal conductivities. However, for heat dissipation applications, filler additions are required to increase the th...

Low density metallic foams of consistent controlled morphology offer improved unique material and mechanical properties, yet they have eluded traditional metallurgical engineering methods. A new method to produce metallic foam through a thermo-plastic expansion process has been discovered and characterized with microtomography. The new foaming process enables porosities unachievable through tra...

Highly porous poly(DL-lactic acid) (PDLLA) foams and Bioglass-filled PDLLA composite foams were characterized and evaluated in vitro as bone tissue engineering scaffolds. The hypothesis was that the combination of PDLLA with Bioglass in a porous structure would result in a bioresorbable and bioactive composite, capable of supporting osteoblast adhesion, spreading and viability. Composite and un...