We describe molecular-scale soft nanoimprint lithographic replication of rubbed polyimide substrates to form alignment layers for liquid crystal devices. Systematic studies of the surface relief morphology of the polyimide and molded structures in three different polymers illustrate good lithographic fidelity down to relief heights of several nanometers, and with some capabilities at the level ...

This study details the use of printing and other additive processes to fabricate a novel amperometric glucose sensor. The sensor was fabricated using a Au coated 12.7 μm thick polyimide substrate as a starting material, where micro-contact printing, electrochemical plating, chloridization, electrohydrodynamic jet (e-jet) printing, and spin coating were used to pattern, deposit, chloridize, prin...

Fabrication techniques have been developed to produce a perforated polymer microtube as a drug delivery device. The technique consists of first forming a silicon platform with trenches and alignment marks to hold the tubes for subsequent processing. Photolithography and reactive ion etching with an inductively coupled plasma source were used to fabricate micro holes on the surface of polyimide ...

Type I fiber Bragg gratings (FBG) written through the coating of various off-the-shelf silica fibers with a femtosecond laser and the phase-mask technique are reported. Inscription through most of the common coating compositions (acrylate, silicone and polyimide) is reported as well as writing through the polyimide coating of various fiber cladding diameters, down to 50 µm. The long term anneal...

The widespread implementation of high-energy-density lithium metal batteries has long been fettered by lithium dendrite-related failure. Here we report a new strategy to address the issue of dendrite growth by a polyimide-coating layer with vertical nanoscale channels of high aspect ratio. Smooth, granular lithium metal was deposited on the modified electrode instead of typical filamentary grow...

We demonstrate an erbium-doped fiber laser passively Q-switched by a black-phosphorus polyimide film. The multi-layer black-phosphorus (BP) nanosheets were prepared via a liquid exfoliation approach exploiting N-methylpyrrolidone as the dispersion liquid. By mixing the BP nanosheets with polyimide (PI), a piece of BP-PI film was obtained after evaporating the mixture in a petri dish. The BP-PI ...

Nanomaterials as anode for lithium-ion batteries (LIB) have gained widespread interest in the research community. However, scaling up and processibility are bottlenecks to further commercialization of these materials. Here, we report that bulk antimony sulfide with a size of 10-20 μm exhibits a high capacity and stable cycling of 800 mAh g(-1). Mechanical and chemical stabilities of the electro...

We present the development of a flexible polyimide substrate that act as the conduit for power and signal transmission with the additional features of precise control of the metal trace geometries. Using microfabrication techniques, a metal trace is fabricated that possesses a flexible polyimide-based interconnection. The performance of the design was measured with multimeter. The HFSS simulati...

The heterogeneous integration of GaAs HEMTs on a polyimide-covered AlN ceramic substrate was demonstrated using a fluidic self-assembly (FSA) technique. We used thin device blocks for the FSA, which have various advantages. In particular, they can reduce the drain-source capacitance Cds of the assembled HEMTs if the substrate has a low dielectric constant. This is a novel kind of semiconductor-...

We developed a new method for characterizing molecular distribution in very thin liquid crystal layer (5–40 nm) evaporated onto rubbed polyimide film used by grazing-incidence X-ray diffraction (GIXD). The diffraction peaks corresponding to intermolecular correlation perpendicular to longitudinal axis of liquid crystal molecule and the clear anisotropic distribution of liquid crystal molecules ...