The photocatalytic efficiency of a thin-film TiO2-coated nanostructured template is studied by dye degradation in water. The nanostructured template was synthesized by metal-assisted wet etching of Si and used as substrate for the deposition of a thin film of TiO2 (10 nm thick) by atomic layer deposition. A complete structural characterization was made by scanning and transmission electron micr...

In this report, a novel photocatalyst based on Bi2WO6/Ag2S heterostructures was prepared by a 3-mercaptopropionic acid (MPA)-assisted route at room temperature. Compared to bare Bi2WO6 and Ag2S nanoparticles, the as-formed Bi2WO6/Ag2S heterostructures exhibit enhanced photocatalytic activity for the degradation of rhodamine B (Rh B) under visible-light irradiation. This kind of enhancement in t...

Photocatalytic degradation of p-cresol was carried out using ZnO under UV irradiation. The amount of photocatalyst, concentration of p-cresol and pH were studied as variables. The residual concentration and mineralization of p-cresol was monitored using a UV-visible spectrophotometer and total organic carbon (TOC) analyzer, respectively. The intermediates were detected by ultra high pressure li...

A ternary ZnO/Ag/CdO nanocomposite was synthesized using thermal decomposition method. The resulting nanocomposite was characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopy, and X-ray photoelectron spectroscopy. The ZnO/Ag/CdO nanocomposite exhibited enhanced photocatalytic activity under visible light irradiation ...

Hierarchical tungsten oxide assemblies such as spindle-like structures, flowers with sharp petals, nanowires and regular hexagonal structures are successfully synthesized via a solvothermal reduction method by simply adjusting the reaction conditions. On the basis of the experimental results, it is determined that the reaction time significantly influences the phase transition, microstructure a...

Photocatalytic degradations of azo dye (RR 180), pesticide (2,4-D) and antibiotic (enrofloxacin) in aqueous solutions were performed and compared by using pure ZnO and ZnO/TiO2 composite (at 1:1 ZnO to TiO2 mole ratio) catalysts in a self-supporting plate form. The plates were produced by tape casting of the constituent powder slurries and sintering at 600°C. Photocatalytic degradations of thes...

A highly efficient third generation catalyst, CaCu3Ti4O12 (CCTO) shows excellent photoelectrochemical (PEC) and photocatalytic ability. As only 4% part of the solar spectrum covers UV light, thus it is highly desirable to develop visible light active photocatalyst materials like CCTO for effective solar energy conversion. A direct band transition with a narrow band gap (1.5 eV) was observed. Un...

This study aimed to prepare titania (TiO₂) nanotube (TNT) arrays grown on un-activated carbon fibers (UCFs), with the application of different TiO₂ loadings based on the coating-hydrothermal process, and to evaluate their photocatalytic activity for the degradation of sub-ppm levels of aromatic pollutants (benzene, toluene, ethyl benzene, and o-xylene (BTEX)) using a plug-flow photocatalytic re...

This article deals with the degradation of NO present in the air by means of a photocatalytic oxidation process based on TiO2 nanoparticles incorporated in a polymer-matrix-based coating. The experimental set-up consisted of a flow type reactor adapted from the ISO 22197-1 standard. NO2 in the gas phase, and nitrate ions adsorbed on the photocatalytic surface were detected as finals products. V...

In this study, N, Scodoped titania photocatalyst was synthesized through an efficient and straight forward method using a single source, ammonium sulfate, as modification agent of titanium isopropoxide (TTIP) precursor. The catalyst was characterized by X-ray powder diffractometer (XRD), element Analysis of carbon, hydrogen, nitrogen (CHN), scanning electron microscopy (SEM), diffuse reflectanc...