FIn this work, AlN/SiCN composite coatings were deposited by r.f.-reactive sputtering method using a facing target-type sputtering (FTS) apparatus with composite targets consisting of Al plate and SiC chips in a gaseous mixture of Ar and N2, and investigated their mechanical properties and microstructure. The indentation hardness (HIT ) of AlN/SiCN coatings prepared from composite targets consi...

Delamination detection in the composite structure based on the vibration responses when excited at the lower modes has been suggested here. It has been observed that the nonlinear interaction between the delaminated layers produce higher harmonics of the exciting frequency. These higher harmonics have observed to be useful for the detection and location of the delamination without comparing the...

structural sandwich beams are widely used because of their high specific stiffness and strength, noise reduction, thermal insulation and impact energy absorption characteristics. conventional manufacturing method of composite sandwich structures is completed by a separate adhesive joining stage by which the composite faces are joined to the core. in this investigation, liquid phase sintering in...

Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...