This work evaluates the effects of grain growth and tetragonality t-ZrO2 phase on mechanical properties 3Y-TZP ceramics. Samples were sintered at 1475 °C for 2 h, 1600 2, 12, or 24 h. After sintering, tetragonal ZrO2 polytypes t t′ observed under all sintering conditions, while a residual content monoclinic was detected in samples The average size found to vary from 0.65 ± 0.10 2.20 0.35 μm. Mo...

The damping capacity and mechanical properties of Mg-6Al-1Zn alloy after heat treatment were investigated. The damping characteristics of un-heat-treated, solution treated, and aged Mg-6Al-1Zn specimens were determined by measuring the damping ratio and the logarithmic decrement of free vibrations of a bending beam clamped at one side. The microstructural evaluations confirmed that the β-Mg17Al...

Fracture toughness and hardness properties of CaO-P2O5 glass-reinforced hydroxyapatite composites have been assessed using indentation techniques and results calculated according to Laugier and Evans' equations. Both properties showed to be dependent upon several microstructural characteristics, namely residual porosity and the percentage of secondary beta and alpha tricalcium phosphate phases ...

Scandium-reinforced aluminum alloys represent a new generation of high-performance alloys that display numerous advantages over high-strength aluminum alloys. Scandium-reinforced alloys are much stronger than other high-strength alloys, exhibit significant grain refinement, strengthen welds, and eliminate hot cracking in welds. These alloys also exhibit a good resistance to corrosion as shown b...

As the usage of pervious concrete continues to increase dramatically, a better understanding of the linkages between microstructure, transport properties, and durability will assist suppliers in mixture proportioning and design. This paper presents various virtual pervious concrete microstructural models and compares their percolation characteristics and computed transport properties to those o...

We investigated the microstructural and fatigue characteristics on consolidated Japanese cedar called “ObiSugi (Cryptomeria japonicain)” fabricated by hot-pressing. Hot-press treatment was conducted at various conditions. Three point bending test, hardness test and plane bending fatigue test of consolidated wood were carried out to investigate mechanical properties. Flexural strength of consoli...

The combined treatment of pressurized gas nitriding and cold rolling is proposed as a new approach to rapid preparation of a strong and tough nitrided layer for steel 38CrMoAlA. The microstructural characteristics and properties of the modified surface layer in comparison with those of the conventionally gas nitrided sample have systematically been evaluated. The results show that the hardness ...