Barium ferrite thin films with perpendicular magnetic anisotropy have been prepared on heated (001) sapphire substrates by laser ablation deposition in an oxygen atmosphere using a KrF excimer laser. X-ray diffraction patterns reveal highly oriented films of the magnetoplumbite phase with a c-axis angular spread of 1.8”. Scanning electron micrographs reveal that these films are polycrystalline ...

A phase-steered microstrip antenna array is presented, suitable for application as a mobile vehicle satellite terminal. Phase shifters are implemented on a hybrid dielectric-ferrite substrate, and use is made of the phase transition near the cut-off region of the biased ferrite. Small permanent magnets and carefully biased ferrites remove the need for large applied electromagnetic fields. 2-, 3...

The control of quasi-static magnetic fields is of considerable interest in applications including the reduction of electromagnetic interference (EMI), wireless power transfer (WPT), and magnetic resonance imaging (MRI). The shielding of static or quasi-static magnetic fields is typically accomplished through the use of inherently magnetic materials with large magnetic permeability, such as ferr...

A microstrip line fabricated on a single crystal hexagonal -type ferrite substrate was utilized to achieve phase shifts of 65 /cm at -band with an external bias field of only 100 Oe. This approach utilizes the rapid variation of the -type ferrite tensor permeability near the ferromagnetic antiresonance frequency. The magnetic and microwave properties of the substrate material were characterized...

The effects of Ba content on the dynamics of the crystallization process, which ultimately determines the grain size, were studied in barium ferrite thin films. Rapid thermal annealing was used to crystallize the amorphous as-deposited barium ferrite films. The annealing time and temperature dependent crystalline volumes were determined from the magnetization of the films, and were analyzed by ...

The possibility of using sendust (FeAlSi) as the soft magnetic underlayer for hexagonal barium ferrite (BaM) and strontium ferrite (SrM) was studied. Sendust films were found to retain their soft magnetic properties with a rapid thermal anneal (RTA) at 800 C for 60 s, which is necessary to crystallize the as-deposited amorphous BaM and SrM films. Several film structures with sendust films as th...

This study demonstrates the effectiveness of heat treatment in optimizing the magneticproperties of cobalt ferrite, compared to other methods such as cation substitution. It also shows how the magnetic properties of the heat treated cobalt ferrite vary under differenttemperature conditions. Saturation magnetization increased more due to heat treatment than due to Zn-substitution; a cation subst...

The effect of annealing temperature (1000-1150 °C) on the microstructure evolution, mechanical properties, and pitting corrosion behavior of a newly developed novel lean duplex stainless steel with 20.53Cr-3.45Mn-2.08Ni-0.17N-0.31Mo was studied by means of optical metallographic microscopy (OMM), scanning electron microscopy (SEM), magnetic force microscopy (MFM), scanning Kelvin probe force mi...

The acicular Mn-Zn ferrite fine particles composed of 65.6 mol% Fe, 21.9 mol% Mn and 12.5 mol% Zn were made. These Mn-Zn femte particles were etched in IN-HC1 solution for 3hrs.. The fine particle was made up of several crystallites whose long axis were 0.2-1.0ptt1, and arranged to (31 1) direction. These fine particles were pressed with applying magnetic field. The oriented Mn-Zn ferrites were...

An automated wheelchair with a guide sensor, guided by a magnetic ferrite marker that is resistant to the presence of dirt, is described. The wheelchair permits the severely disabled, as well as the older population, to move about freely, both indoors and outdoors. This is due to the simple operation involved (pushing a button), and a magnetic ferrite marker lane which is minimally influenced b...