An arc-sprayed amorphous Al–Ti–Ni coating on S355 structural steel was processed by laser remelting (LR) at powers of 600, 800, and 1000 W. The surface-cross-sectional morphologies, chemical element distributions, and phase compositions of the as-obtained Al–Ti–Ni coatings were analyzed using a scanning electron microscope (SEM), energy-dispersive spectrometer (EDS), and X-ray diffractometer (X...

The stability of an electrodeposited nanocrystalline Ni-based alloy coating in a H₂S/CO₂ environment was investigated by electrochemical measurements, weight loss method, and surface characterization. The results showed that both the cathodic and anodic processes of the Ni-based alloy coating were simultaneously suppressed, displaying a dramatic decrease of the corrosion current density. The co...

In this study, a new mild steel surface pretreatment solution is introduced based on phosphoric acid containing a benzimidazole derivative as inhibitor. In this way, three different benzimidazole derivatives namely benzimidazole BI, 2-methyl benzimidazole 2MBI and 2-aminobenzimidazole 2ABI were studied in the 1M H3PO4 using DC and AC electrochemical techniques. Results revealed the better corro...

Different corrosion mitigation strategies (e.g. inhibitors, coatings) are employed in the construction industry to mitigate chloride-induced bridge decks and reinforced concrete pavements. While epoxy coatings effective mitigating rebar corrosion, their local damage during transportation may lead aggressive pitting corrosion. Besides, cannot be repaired in-situ due toxic nature requirement for ...

One of the possibilities to mass-produce dye-sensitized solar cell (DSSC) device is if it could be embedded to the area atop metal roof. However, the use of metal substrate is constrained by the corrosion caused by the electrolyte solution used in the DSSC device such as iodide/tri-iodide (I-/I3-). In this study, we propose the utilization of polyaniline/reduced graphene o...

Copper alloys are widely used in the manufacturing of heat transfer applications, this due to their excellent heat transfer properties. Copper contamination is one of the serious industrial problems in the boiler feed water system. This contamination commonly resulted from copper corrosion reactions in boiler feed water environment. The best way to reduce the copper contamination is by improvin...

A discotic liquid crystal (DLC), HBC-C12, coating was successfully applied to improve the corrosion resistance of an iron surface. The iron surface with the DLC-coating exhibited improved corrosion resistance in various environments, including exposure to air and solutions with different pH values. To the best of our knowledge, studies regarding corrosion protection using DLCs have never been r...

In this study, the corrosion resistance of a bituminous coating reinforced with different ratios of nanoclay pigment was studied. To make nanocomposite coatings, 2, 3, and 4 wt.% of clay (Cloisite Na+) were incorporated into water emulsified bitumen. The coatings were applied to steel 37. Optical microscopy and X-ray diffraction (XRD) were used to characterize the nanocomposite structure. In or...

Conducting polymers (CPs), including polypyrrole, have attracted attention for their potential in the protection of metals against corrosion; however, CP coatings have the limitation of poor adhesion to metal substrates. In this study, a composite coating, comprising a self-organized porous anodic oxide layer and a polypyrrole layer, has been developed on iron. Because of electropolymerization ...