Due to the large contribution of the coldstart process to unburned hydrocarbon emissions of an internal combustion engine during FTP cycle tests, we take a new look at the production of hydrocarbons inside the combustion chamber during coldstart. To this end a model is developed which predicts the exhaust port hydrocarbon concentration, exhaust gas temperature and equivalence ratio based on a s...

The spatial distribution of chemical species can be a critical determinant of the performance of chemical reactors. One such reactor is the combustion chamber of the Internal Combustion engine. This paper presents a design for the measurement of hydrocarbon concentration distribution within a running engine using Near Infra-Red absorption tomography. The fundamentals of the technique, and desig...

The design and development of modern internal combustion engines is marked by a reduction in exhaust gas emissions and increase in specific power and torque. This paper aims at the study of noise reductuion in4-stroke common rail direct injection engine at idle speed. Idle speed is basically a speed of engine when vehicle is not running i.e not in motion . Now a days , this siuation oftenly com...

Homogeneous charge compression ignition (HCCI) combustion enables higher thermal efficiency and lower NOx emission to be achieved in internal combustion engines compared to conventional combustion systems. A new concept HCCI engine system fueled with dimethyl ether (DME) with a high cetane number and methanol-reformed gas (MRG) with high anti-knock properties has been proposed by the author et ...

Commercial transportation fuels are complex mixtures containing hundreds or thousands of chemical components, whose composition has evolved considerably during the past 100 years. In conjunction with concurrent engine advancements, automotive fuel composition has been fine-tuned to balance efficiency and power demands while minimizing emissions. Pollutant emissions from internal combustion engi...

The lubrication system of an internal combustion engine serves many purposes. It lubricates moving parts, cools the engine, removes impurities, supports loads, and minimizes friction. The entrapment of air in the lubricating oil is called oil aeration. Oil aeration can be detrimental to internal combustion (IC) engines. This study attempts to determine a means to reduce the level of aeration in...

homogenous charge compression ignition (hcci) combustion is spontaneous multi-site combustion of a nominally premixed air/fuel mixture that exhibits high rate of pressure rise and short combustion duration. to avoid excessive pressure rise rate and knocking, hcci engines are fueled with highly diluted mixture using a combination of excess air and/or egr. hcci combustion is attractive due to ext...