Undoped and indium (In)-doped lead telluride (PbTe) nanostructures were synthesized via solvothermal/hydrothermal route. The crystalline structure of the as-prepared undoped and In-doped PbTe samples was examined by X-ray diffraction (XRD) which indicated the formation of face-centered single-phase cubic crystal. A first principle calculation on indium doping shows that the indium atoms are mor...

OBJECTIVES Suspended indium dust in an indium-recycling plant was quantified, in order to improve the work environment and to reduce workers' exposure to the dust. METHODS Assessment of indium dust in the workplace air by multipoint area sampling and personal breathing zone sampling was conducted twice in 2004 and 2008. RESULTS In 2004, all recycling processes except for purity analysis wer...

Growth of GaAs and In(x)Ga(1-x)As nanowires by the group-III assisted molecular beam epitaxy growth method on (001)GaAs/SiO(2) substrates is studied in dependence on growth temperature, with the objective of maximizing the indium incorporation. Nanowire growth was achieved for growth temperatures as low as 550 °C. The incorporation of indium was studied by low temperature micro-photoluminescenc...

Single crystalline indium nanowires were prepared on Zn substrate which had been treated in concentrated sulphuric acid by galvanic displacement in the 0.002 mol L-1In2(SO4)3-0.002 mol L-1SeO2-0.02 mol L-1SDS-0.01 mol L-1citric acid aqueous solution. The typical diameter of indium nanowires is 30 nm and most of the nanowires are over 30 μm in length. XRD, HRTEM, SAED and structural simulation c...

The aim of this study was to assess the relationship between indium exposure concentration in the respirable dust fraction (In-E) and indium in serum (In-S) in workers. Methods: A total of 39 workers were studied. The study subjects were categorized into 3 groups, namely, smelting workers (n=7), ITO workers (n=6) in an ITO grinding plant, and other workers (n=26). In-E and In-S ranged from 0.00...

Introduction: There are many ways to treat cancer and pain relief. One of the methods is radiopharmaceutical therapy. Indium 111-rituximab contains the radioisotope indium-111 and rituximab. The Indium-111, after decay, emits gamma rays with energies of 245 KeV and 171 KeV, and beta-radiation of 26 KeV. In this study, the absorbed dose of 111In-Rituximab in human body was calcu...

A static pressure-induced decomposition of indium hydroxide into metallic indium that takes place at ambient temperature is reported. The lattice parameter of c-In(OH)(3) decreased upon compression from 7.977(2) to approximately 7.45 A at 34 GPa, corresponding to a decrease in specific volume of approximately 18%. Fitting the second-order Birch-Murnaghan equation of state to the obtained compre...

The large temperature sensitivity of the Sagnac loop interferometer based on the birefringent holey fiber filled with metal indium was experimentally demonstrated. The temperature sensitivities of the wavelength shift of the interferometer and the birefringence the fiber with indium were measured to be -6.3 nm/K and -3.3x10(-6) /K, respectively. The large temperature sensitivity of the fiber wa...

Nanomechanical properties of indium nanowires like structures fabricated on quartz substrate by trench template technique, measured using nanoindentation. The hardness and elastic modulus of wires were measured and compared with the values of indium thin film. Displacement burst observed while indenting the nanowire. 'Wire-only hardness' obtained using Korsunsky model from composite hardness. N...