Porous alumina film on aluminum with gel-like pore wall was prepared by a two-step anodization of aluminum, and the corresponding gel-like porous film was etched in diluted NaOH solution to produce alumina nanowires in the form of densely packed alignment. The resultant alumina nanowires were reacted with NH(3) and evaporated aluminum at an elevated temperature to be converted into densely pack...

Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

Electrical conductivity in the Earth's mantle is sensitive to temperature and chemical environment. Recent laboratory measurements of electrical conductivity are combined with candidate mantle geotherms to produce synthetic electrical conductivity profiles. These profiles are used to forward model the Earth's geomagnetic response function C, results of which are compared with the observed globa...

A series of polycarboxylate ether-based copolymers that include acrylic acid, 2acrylamido-2-methylpropane sulfonic acid, and polyethylene glycol-1000 was synthesized and the performance of these copolymers as rheology modifiers in aqueous alumina suspensions was characterized. We discussed the effect of monomer feed ratio and molecular weight on dispersing ability of these copolymers and on ext...

The growth of ordered nanorods of mesoporous SBA-15 inside a porous alumina membrane has been achieved for the first time by a simple sol-gel method. The obtained SBA-15 nanorods themselves have ordered hexagonal mesochannels with a size of about 6 nm and have been arranged to form hexagonal arrays by the limitation of pores of the alumina membrane. The synthesized alumina membrane with mesopor...

Alumina nanostructures, nanowires, and semicolumn nanotubes with high aspect ratios were synthesized by the chemical etching of porous alumina membranes (PAMs) in phosphoric acid solution. The morphology and structure of alumina nanostructures were analyzed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction (XRD), respectively. The results showed that...

The adsorption of piperidine vapor on the hydrated alumina (alpha-Al2O3, corundum) (0001) surface was investigated using vibrational broad bandwidth and scanning sum frequency generation (SFG) spectroscopy. The interfacial vibrational signature in the C-H stretching region of piperidine at the alumina (0001) surface is shown to be a sensitive spectroscopic probe revealing the adsorption mechani...

INTRODUCTION Flexure of a dental composite can be detrimental to the success of a restoration. Flexibility considerations are thus important when comparing dental materials to optimize the success of resin restorations. AIMS AND OBJECTIVES Flexibility of 5.6 x 18.0 x 2.0 mm3 experimental alumina/feldspar and SR ADORO dental composites specimens were compared. It was hypothesized that alumina/...

agal2o3 nanocomposite were synthesized by solution combustion technique using ammonium carbonate as a new fuel under simultaneous combustion of alumina and silver particles condition. samples prepared with different amount of silver, were characterized by xrd, bet, sem and optical absorption measurements. xrd analysis was used to determine the change in phase and size of the synthesized nanopar...

To study the photodegradation of organic pollutants at the interface of minerals and water in natural environment, three series of alumina-coupled iron oxides (Al(2)O(3)-Fe(2)O(3)-300, Al(2)O(3)-Fe(2)O(3)-420, and Al(2)O(3)-Fe(2)O(3)-550) with different alumina fraction were prepared and characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Barret-Joyner-Halender (BJH), and...