in this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. parameters studied include reinforcing index (ω...

Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use. The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. While most B2 materials are brittle, a new class of B2 (rare-earth) intermetallic compounds is observed to have lar...

The influences of age hardening and HIP (Hot Isostatic Pressing) on the mechanical properties of A356 (Al 7Si 0.6 Mg) casting alloys were studied. Cast bars were homogenized, heated and maintained at a temperature of 540°C for a duration of 2 hours, followed by rapid cooling in a polymeric solution. The castings were age hardened at 180°C for a duration of 4 hours before being subjected to HIP ...

We have studied the effects of grain boundary adhesion and grain size on the ductility of thin metal films well bonded to polymer substrates, using a finite element method. It is shown that the ductility of polymer-supported metal films increases approximately linearly as the grain boundary adhesion increases, and as the grain size decreases. A rule-of-thumb estimate of the ductility of polymer...

The element of Fe can enhance the strength of TiB2/TiAl composite, but it is detrimental to the ductility of the composite due to the existence of large bulk TiB2 phase at grain boundary. The element of Mn is beneficial to the ductility of TiB2/TiAl composite, of which the fracture strain increases from 15.9 to 17.9 % with the addition of 2 at.% Mn. The element of Co can improve the strength an...

High-strength microalloyed steels are widely used in various branches of technology and industry due to the simultaneous combination high indicators strength, ductility, fatigue, corrosion resistance, other service properties. This is achieved reasonable choice optimal chemical composition parameters temperature-deformation treatment steel that provide a synergistic effect on dispersed microstr...

A low density, high strength medium-Mn steel was processed to produce a bimodal duplex microstructure consisting of coarse grained γ-austenite with fine δ-ferrite grains decorating the boundaries. Using combination ex situ analysis and in neutron diffraction, deformation mechanisms lattice strains within each phase were identified for specimens undergoing uniaxial tension during room elevated t...