During crystallization the control and effective distribution of heat transfer from the solution to the heat exchanger (HE) plays an important role. Inhomogeneity in temperature on the HEsurface limits the production capacity and increases the tendency of an isolating scale layer formation. To avoid scaling, scraper blades on the HE are commonly used. In a typical axi-symmetric geometry the sca...

Oil refinery is one of industries that require huge energy consumption. The today technology advance requires energy saving. Heat integration is a method used to minimize the energy comsumption though the implementation of Heat Exchanger Network (HEN). CPT is one of types of Heat Exchanger Network (HEN) that functions to recover the heat in the flow of product or waste. HEN comprises a number o...

Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...

Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...

0017-9310/$ see front matter 2009 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2009.12.007 * Corresponding author. E-mail address: [email protected] (K. Vafai). Analytical models are utilized to investigate the thermal performance of rectangular and disk-shaped heat pipes using nanofluids. The liquid pressure, liquid velocity profile, temperature distribution of the heat pipe wall, tempera...

Compact heat exchangers (CHE) are very well known for their special design which includes high heat transfer coefficient and maximum temperature driving force between the hot and cold fluids. The accurate prediction of the thermal performance of a compact heat exchanger in the design stage is highly desirable for most aerospace applications. In the present study, the numerical investigation for...

Customarily, the LMTD correction factor, FT, is used to screen alternative designs for a heat exchanger. Designs with unacceptably low FT values are discarded. In this paper, authors have proposed a more fundamental criterion, based on feasibility of a multipass exchanger as the only criteria, followed by economic optimization. This criterion, coupled with asymptotic energy targets, provide the...

In recent years, the use of heat pipe for electronic equipments thermal management has been growing faster to meet the future requirements. The flat plate heat pipes (FPHP) are promising heat transporting devices capable of transmitting high heat fluxes rejected by modern electronic equipments. In the present study, the experimental analysis of the thermal performance of flat plate heat pipe is...

This paper experimentally studies the heat absorption performance of a heat sink with vertical embedded heat pipes in the aluminum blade. The cooling system with embedded heat pipes distributes heat from the CPU to both the base plate and the heat pipes, and then transfer heat from fins to the Environment. The thermal resistance and heat transfer coefficient are evaluated for natural convection...

Heat exchanger networks are widely employed in the chemical processing industries to recover energy, resulting in reduced operating costs. Several methodologies can be found in the literature for the design of heat exchanger networks. Typical criteria are maximum energy recovery and minimum heat transfer area. However, the heat integration of process streams can lead to process structures that ...