the excellent performance of fluidized bed heat exchangers is due to the interaction between particles and heat transfer surface and to the mixing effects in the viscous sublayer. in this paper, the results of experimental investigations on heat transfer for a wide range of newtonian and non-newtonian (shear-thinning power law) fluids are presented. new design equations have been developed for ...

In this paper the effect of site conditions, which are Altitude, Temperature and Relative Humidity and also Heat Dissipation Capacity are investigated on the optimized design of natural draft dry cooling towers with specific kind of heat exchangers, known as Forgo T60 type. A genetic algorithm program has been developed for optimized design of these cooling towers. Objective function includes b...

We demonstrate a novel method to fabricate an axial p-n junction inside <111> oriented short vertical silicon nanowires grown by molecular beam epitaxy by combining ion implantation with in-situ doping. The lower halves of the nanowires were doped in-situ with boron (concentration ~1018cm-3), while the upper halves were doubly implanted with phosphorus to yield a uniform concentration of 2 × 10...

The activities of manganese in Mn-C and Mn-Si melts at 1673K have been determined. The transportation method was applied to the vapor pressure measurement. The activities of manganese in the Mn-C melts as referred to pure liquid manganese showed the positive deviation from ideality at less than 0.17 atomic fraction of carbon and deviated negatively above this value. The activities of manganese ...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

With the increasing of the environmental concerns, carbon dioxide (CO2) as an alternative refrigerant has been investigated intensively. In this study, the heating performance of a transcritical CO2 heat pump system with a twinrotary compressor was investigated. The transcritical CO2 heat pump with gas injection was tested by varying gas injection ratio and outdoor temperature at the optimum re...

The composition, vapour pressure, and heat capacity of nine biodiesel fuels from different sources were measured. The vapour pressure of the biodiesel fuels is modeled assuming an ideal liquid phase of the fatty acid methyl esters constituting the fuel. New methodologies to calculate the vapour pressure and ideal gas and liquid heat capacities of the biodiesel fuel constituents are proposed. Tw...