The main objective of incorporating natural fibers such as Henequen microfibers (NF) into the High Density Polyethylene (HDPE) polymer matrix is to reduce the cost and to enhance the mechanical as well as other properties. The Henequen microfibers were chopped manually to 5-7mm in length and added into the polymer matrix at the optimized concentration of 8 wt %. In order to facilitate the link ...

Thermal behaviors of wheat straw flour (WF) filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One...

The thermal and photooxidative behaviour of polyethylenes of different manufacturing histories (linear low, metallocene and high density) have been investigated by FTIR spectroscopy and the data related to the chemiluminescence (CL) and thermal analysis of the polymers. The CL intensity and activation energies for thermal decomposition were found to be dependent on the rates of oxidation of the...

Polycyclic aromatic hydrocarbons (PAHs) on virgin polystyrene (PS) and PS marine debris led us to examine PS as a source and sink for PAHs in the marine environment. At two locations in San Diego Bay, we measured sorption of PAHs to PS pellets, sampling at 0, 1, 3, 6, 9, and 12 months. We detected 25 PAHs using a new analytical method with comprehensive two-dimensional gas chromatography couple...

This research investigates the possibility of using high-density polyethylene (HDPE) plastic waste to improve properties asphalt concrete pavement. HDPE contents 1, 3, 5, and 7% by aggregate weight were used. waste=stabilized pavement (HDPE-ACP) was evaluated performance testing for stability, indirect tensile strength, resilient modulus (MR), fatigue (ITF). In addition, microstructure, age, CO...

Composites based on green high-density polyethylene (G-HDPE) and hydroxyapatite (HA) compatibilized with maleic anhydride grafted (HDPE-g-MAH) were developed in this work. The main objective was to evaluate the effects of HA HDPE-g-MAH contents mechanical thermal properties hydrolytic degradation composites through design experiments statistical analysis, as well hemolytic stability. Hydroxyapa...

Recycled high-density polyethylene (r-HDPE) was combined with waste carbon fiber by loading 6 k, 12 and 24 k tows through an extruder to create thermoplastic/carbon pellets volume fractions of 11.2%, 18.9%, 29.5%, respectively. Tensile flexural coupons were subsequently produced via injection molding novel 3D printing. The addition into r-HDPE in all cases showed increased mechanical properties...

Macrophages are the major cell type observed in the inflammatory membrane retrieved at implant revision surgery. In this study, mature human monocyte-derived macrophages (MDM) were adapted to a previously established in vitro model to examine the influence of high-density polyethylene (HDPE) particulate (4-10 microm) on MDM viability. HDPE particles were suspended in soluble type I collagen, wh...

This life cycle design (LCD) project was a collaborative effort between the National Pollution Prevention Center at the University of Michigan, General Motors (GM), and the U.S. Environmental Protection Agency (EPA). The primary objective of this project was to apply life cycle design tools to guide the improvement of fuel tank systems. Two alternative fuel tank systems used in a 1996 GM vehicl...

This study examined the effect coextruding a clear HDPE cap layer onto HDPE/wood-flour composites has on the discoloration of coextruded composites exposed to accelerated UV tests. Chroma meter, XPS, SEM, and UV vis measurements accounted for the analysis of discoloration and degree of oxidation of both uncapped (control) and coextruded composites before and after UV exposures. Two separate dis...