OBJECTIVE Contradictory results have been reported over microleakage studies of restorative materials and methods. Despite the number of publications on leakage there are few evidences comparing the different microleakage evaluation methods. The purpose of the present study was to compare the clearing technique and longitudinal sectioning in the evaluation of dye penetration along a glass fiber...

Members of the Miridae (Lygus lineolaris Palisot de Beauvois and Pseudatomoscelis seriatus Reuter) and Pentatomidae (Acrosternum hilare Say, Euschistus servus (Say), Euschistus tristigmus (Say), Euschistus quadrator Rolston, Oebalus pugnax (F.), Piezodorus guildinii (Westwood), and Thyanta custator accerra McAtee) comprise a piercing-sucking insect complex that continues to plague multiple crop...

For pump installation most experts recommend installing conventional metallic baseplates on concrete foundations and securing them to the foundation with a combination of anchor bolts and epoxy grout. Many papers have been written on the techniques required to obtain a good quality installation free of voids and properly bonded to the concrete and baseplate itself so as to give a long trouble-f...

Rehabilitation of a watermain by grouted sliplining is usually carried out when the existing pipe is only partially deteriorated. Although designs that neglect the structural contributions from the existing pipe and the grout are generally conservative, the performance of the rehabilitated pipe needs to be better understood for effective design and management of buried water pipes. Presented in...

Abstract The present research exposes the investigation on three-dimensional modeling of single and twin metro tunnels for case Tehran line. At first, simulation implemented comparison ground movements in tunnels. Then has been performed influence effective parameters EPB-TBM surface settlements throughout excavation. overcutting, shield conicity, grouting, final lining system modeled face supp...

This study investigated differences in penetration between fibers and spherical particles through faceseal leakage of an N95 filtering facepiece respirator. Three cyclic breathing flows were generated corresponding to mean inspiratory flow rates (MIF) of 15, 30, and 85 L/min. Fibers had a mean diameter of 1 μm and a median length of 4.9 μm (calculated aerodynamic diameter, d(ae) = 1.73 μm). Mon...

Abstract With the increased use of cable bolts in mining and civil projects worldwide, it is important to understanding performance these support structures different scenarios. The axial load transfer mechanisms six were investigated experimentally this research study. A large-scale pull-out testing apparatus with a capacity 1000 kN was designed manufactured as part investigation. common comme...