Seven glass-ionomer cements were tested and compared with a composite resin in order to find the glass-ionomer cement with the highest bond strength to enamel with normal anatomy and composition (not ground). Five types of surface treatment were used. The results show that Aqua Cem and Ketac Cem, both water-hardening, present the highest bond strength, followed by the conventional glass-ionomer...

The aim of this study was to test the hypothesis that there is no difference in the fluoride release behavior of resin-reinforced glass ionomer cements before or after fluoride recharge. The materials were divided into 5 groups: 2 resin-reinforced glass ionomer cements used for attaching orthodontic bands, that is, group FOB (Fuji Ortho Band) and group MCB (Multi-Cure Glass Ionomer Orthodontic ...

It is very important in the design of a drying system is to evaluate sticking behaviour of the materials goes under drying. A new approach to the sticking issue is applied in this study by carrying out a sticking test for the liquid associated with the materials under study. It was found that the liquid bridge is responsible of the initial sticking of the materials to the contact surface and th...

Type II conventional glass-ionomer cements (GIC) are restorative materials consisting of powder and liquid mixed to produce a plastic mass that subsequently sets to a rigid solid. The early GIC was marketed without the expired date, although this material has been currently marketed with the expired date, how stable the materials are not yet clear. The purpose of this study was to evaluate the ...

The development of dental materials with improved properties and increased longevity can save costs and minimize discomfort for patients. Due to their good biocompatibility, glass ionomer cements are an interesting restorative option. However, these cements have limited mechanical strength to survive in the challenging oral environment. Therefore, a better understanding of the structure and hyd...

Drilling of glass fibre reinforced plastic (GFRP) composite is different from metallic materials due to its mechanical properties. The drilling of this material may generate delamination of drilled holes on workpiece. The purpose of this paper is to investigate the influence of the cutting parameters, such as cutting speed and feed rate, point angle of drill and material thickness on delaminati...

AIM The objective of this study was to assess the effect of heat application on the mechanical properties of glass ionomer cements. MATERIALS AND METHODS STUDY DESIGN experimental design. The effect of heat on glass ionomer cements during their setting was evaluated by measuring compressive strength, flexural strength and microhardness. Moroever, temperature changes from one surface of the...

The current study evaluated the bonding ability of composite to glass ionomer cement (GIC) using three different bonding systems. One hundred samples of composites bonded to GIC were prepared and divided into five groups. In Group A, the composite was bonded to GIC after the initial setting of the GIC being employed as a total-etch adhesive. In Group B, the self-etch primer was employed to bond...

OBJECTIVES The aim of this study was to evaluate surface roughness and hardness of a nanofiller GIC, a resin-modified GIC, three conventional GICs, and a silver-reinforced GIC. METHODS For each material, 11 spcecimens were prepared and then stored in distilled water at 37 °C for 24 h. The surface roughness of 5 specimens was measured using a surface profilometer before polishing and after pol...

The purpose of this study was to evaluate the surface roughness of four conventional chemically cured glass ionomer cements (Fuji IX, Ketac Molar, Vidrion R and Vitromolar) commonly used in atraumatic restorative treatment (ART) immediately after material preparation. Twenty specimens of each glass ionomer cement were fabricated and surface roughness was measured after material setting. The spe...