Citation: Yan L, Wang B and Kasal B (2017) Can Plant-Based Natural Flax Replace Basalt and E-Glass for Fiber-Reinforced Polymer Tubular Energy Absorbers? A Comparative Study on Quasi-Static Axial Crushing. Front. Mater. 4:42. doi: 10.3389/fmats.2017.00042 can Plant-Based natural Flax replace Basalt and e-glass for Fiber-reinforced Polymer Tubular energy absorbers? a comparative study on Quasi-s...

Precise quantitative addition of multiple reagents into droplets in sequence is still a bottleneck in droplet-based analysis. To address this issue, we presented a simple and robust glass fiber-induced droplet coalescence method. The hydrophilic glass fiber embedded in the microchannels can induce the deformation of droplets and trigger the coalescence. Serial addition of reagents with controll...

In this paper, we have proposed a novel structure of the fabrication of a chalcogenide As2Se3 glass photonic crystal fiber (PCF) with increased core diameter. As comparision with the normal PCFs in which silica glass is used as core material, the proposed PCF has following feature; firstly we have used the chalcogenide As2Se3 glass as core material in which the first ring area contains no air h...

Tm-doped alkali germanate glass is investigated for use as a laser material. Spectroscopic investigations of bulk Tm-doped germanate glass are reported for the absorption, emission and luminescence decay. Tm:germanate shows promise as a fiber laser when pumped with 0.792 μm diodes because of low phonon energies. Spectroscopic analysis indicates low nonradiative quenching and pulsed laser perfor...

A high-sensitivity, low-cost, ultrathin, hollow fiber micro bubble structure was proposed; such a bubble can be used to develop a high-sensitivity strain sensor based on a Fabry-Perot interferometer (FPI). The micro bubble is fabricated at the fiber tip by splicing a glass tube to a single mode fiber (SMF) and then the glass tube is filled with gas in order to expand and form a micro bubble. Th...

UNLABELLED Direct deposition of graphene layers on the flexible glass fiber surface to form the three-dimensional (3D) core-shell structures is offered using a two-heating reactor chemical vapor deposition system. The two-heating reactor is utilized to offer sufficient, well-proportioned floating C atoms and provide a facile way for low-temperature deposition. Graphene layers, which are control...

In this study, six combinations of flax, hemp, and glass fiber were investigated for a hybrid reinforcement system in a polyurethane (PU) composite. The natural fibers were combined with glass fibers in a PU composite in order to achieve a better mechanical reinforcement in the composite material. The effect of fiber hybridization in PU composites was evaluated through physical and mechanical p...

OBJECTIVE The aim of this study was to evaluate the influence of endodontic irrigants on the tensile bond strength of an adhesive system used to cement glass fiber posts to dentin. STUDY DESIGN Fifty bovine roots were divided into 5 groups according to the solution used during instrumentation: G1, 0.9% NaCl (control); G2, 1.0% NaOCl; G3, 2.5% NaOCl; G4, 5.25% NaOCl; G5, 2% chlorhexidine gel +...

This work reports the high-velocity impact response of multiscale anisogrid composite (AGC) panels. The aim of the present study is to evaluate the influence of surface-modified multi-walled carbon nanotubes (S-MWCNTs) at different S-MWCNTs contents (0-0.5 wt.% at an interval of 0.1 wt.%) on the high-velocity impact responses of E-glass/epoxy AGC. Surface modification of MWCNTs is confirmed by ...

The binding of [3H]3,4-methylenedioxymethamphetamine [( 3H]MDMA) to both rat brain membrane preparations and glass fiber filter papers was analyzed in the present study. Saturation studies indicate that [3H]MDMA binding is saturable and monophasic in both the presence and absence of rat brain membranes. This apparent 'specific' binding of [3H]MDMA in both the presence and absence of brain homog...