Objectives: This study is undertaken to evaluate the dependence of bond strength of 100% fresh nonprecious alloy and the combination of 50% recast (used) alloy and 50% fresh alloy with three different veneering ceramic material. Materials and methods: To evaluate the shear bond strength between new and recast alloy nonprecious Ni-Cr alloy (System KN®, Adentatec, Germany) was used with three dif...

Advanced engineering ceramics which are widely used as high strength refractory material for several industrial applications, always pose a challenging opportunity to machine them. Conventional methods of machining are difficult to shape them because of their high hardness and brittleness, while grinding is the only popular method to machine them, but shaping of ceramics in desired form is diff...

Yongxiang Li and Zhiguo Yi State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China Giuseppe Pezzotti Ceramic Physics Laboratory, Kyoto Institute of Technology, Sakyo-ku, Matsugasaki, 606-8585, Kyoto, Japan and Research Institute for Nanoscience (RIN) Kyoto Institute of Technology, Sakyo-k...

An analysis of the high resolution optical spectra (at 10 or 300 K) of Sm in YAG transparent ceramics is presented. The peculiarities of the spectra in ceramics are outlined. Accurate data for the application of Sm: YAG ceramic to suppress parasitic oscillations in high power Nd: YAG ceramic composite lasers are obtained.

The thermal-birefringence effect in Nd(3+) -doped YAG ceramics has been investigated. The amount of depolarization induced by thermal birefringence in Nd:YAG ceramics is nearly the same as that in (111)-cut single crystals at the same Nd(3+) concentration. However, depolarization becomes larger as the Nd(3+) concentration increases, even at the same absorbed pump power.

transparent glasses in a system of li2o-mgo-sio2-al2o3-fchemical constituents were prepared by melt quenching method. in the fabrication of nanocrystal glass-ceramics, controlled nucleation and subsequent crystal growth were necessary to avoid loss of transparency. it was therefore important to understand thermal properties and crystallization kinetics of the glass ceramics. the crystallization...

objective: in all ceramic fixed partial dentures the connector area is a common fracture location. the survival time of three-unit fixed partial dentures may be improved by altering the connector design in regions of maximum tension. the purpose of this study was to determine the effect of buccolingual increase of the connector width on the stress distribution in posterior fixed partial denture...

PURPOSE The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: ...

abstract   statement of problem: fracture of veneering porcelain has been described as the most frequent reason for the failure of zirconia-based fixed restorations. objectives: the purpose of this study was to evaluate and compare the shear bond strength of a zirconium oxide core material to three commercial veneering ceramics. materials and methods: three types of veneering ceramics were sele...

INTRODUCTION: In orthopedic surgery, bone grafting has been performed to treat diseases and injuries, such as bone tumor and bone fracture. In general, bone implantation is classified into three types: i) auto-grafting, ii) allografting and iii) artificial-bone grafting. Among these bone implantations, auto-grafting is well-known as a common practice and is harvested from the patient. However, ...