Homogeneous charge compression ignition (HCCI) combustion enables higher thermal efficiency and lower NOx emission to be achieved in internal combustion engines compared to conventional combustion systems. A new concept HCCI engine system fueled with dimethyl ether (DME) with a high cetane number and methanol-reformed gas (MRG) with high anti-knock properties has been proposed by the author et ...

Homogenous Charge Compression Ignition (HCCI) is a mode of combustion in IC engines in which premixed fuel and air are ignited spontaneously. There is a belief that HCCI engines have a great potential to improve fuel consumption and reduce NOx emissions. In this study, a single zone, zero dimensional, thermo-kinetic model has been developed and a computer program with MATLAB software is use...

diesel fuel has a limited resource and concerns over environmental pollution areleading to the use of ‘bio-origin fuels’ as they are renewable and environmentally benign. jatrophamethyl ester, an esterified biofuel, has an excellent cetane number and a reasonable calorific value.it closely resembles the behaviour of diesel. however, being a fuel of different origin, the standarddesign limits of...

Reducing the exhaust emissions of an spark ignition engine by means of engine modifications requires consideration of the effects of these modifications on the variations of crankshaft torque and the engine roughness respectively. Only if the roughness does not exceed a certain level the vehicle do not begin to surge. This paper presents a method for controlling the air-fuel ratio for a lean bu...

In this work, number concentration and size distribution at the exhaust of a Port Fuel Injection (PFI) Spark Ignition (SI) engine downstream a three-way catalyst and a Direct Injection Common Rail Diesel engine have been measured with two particle size instruments. The gas exhaust is first diluted, a nano DMA is used to obtain the particles size distribution function in the 3-60 nm range, in pa...

The application of the Livengood-Wu (LW) integral method as a tool to estimate knock onset in spark ignited (SI) engines and combustion phasing advanced compression ignition (ACI) has been demonstrated through simulations several times. In this study, effect uncertainties associated with parameters required for LW method, when used model based control timing an ACI engine, were experimentally s...

Significant progress has been made in the construction and theoretical understanding of molecular motors because of their potential use. Here, we have demonstrated fabrication of a simple but powerful 1 nm thick graphene engine. The engine comprises a high elastic membrane-piston made of graphene and weakly chemisorbed ClF3 molecules as the high power volume changeable actuator, while a 532 nm ...

The effects of unleaded gasoline and unleaded gasoline–ethanol blends on engine performance and pollutant emissions were investigated experimentally in a single cylinder, four-stroke spark-ignition engine with variable engine speeds (2600–3500 rpm). Four different blends on a volume basis were applied. These are E0 (0% ethanol + 100% unleaded gasoline), E3 (3% ethanol + 97% unleaded gasoline), ...

In order to understand better the auto-ignition process in an HCCI engine, the influence of some important parameters on the auto-ignition is investigated. The inlet temperature, the equivalence ratio and the compression ratio were varied and their influence on the pressure, the heat release and the ignition delays were measured. The inlet temperature was changed from 25 to 70 °C and the equiva...