The activated sludge process is one of the most important parts of conventional wastewater treatment plants. Wastewater is treated biologically in activated sludge basins. Activated sludge can remove soluble contaminants, primarily organics compounds and nitrogen, from the wastewater stream. The activated sludge is a mixture of microorganisms, inorganic and organic compounds aggregated to flocs...

The lightweight aggregates used by the civil engineering market are sintered at a high temperature, about 1200 °C. In times of high energy prices and regulation of carbon dioxide emissions, lightweight aggregate products of the high-temperature process in sales marketing are not readily accepted. This study developed a sintered-type paper sludge lightweight aggregate. In order to reduce energy ...

In order to study the performance and mechanisms of excess sludge reduction in the activated sludge that incorporates the Cannibal Process, laboratory activated sludge systems incorporating an anaerobic bioreactor into the sludge recycle stream were operated. In this study, the solids production in the Cannibal system was about 35-40% of the conventional system under steady state conditions. Th...

Activated sludge is widely used to treat municipal and industrial wastewater globally and the formation of activated sludge flocculates (flocs) underpins the ability to separate sludge from treated water. Despite the importance of activated sludge flocs to human civilization there have been precious few attempts to rationally design fit for purpose flocs using a bottom-up approach based on a so...

This work deals with the effect of combined microwave-ultrasonic pretreatment on the anaerobic biodegradability of primary, excess activated and mixed sludge. The characteristics, biodegradability and anaerobic digester performance for untreated primary, excess activated and mixed sludge were compared to combined microwave-ultrasonic pretreated primary, excess activated and mixed sludge. All sl...

Implantable microelectrode arrays (MEAs) have been a boon for neural stimulation and recording experiments. Commercially available MEAs have high impedances, due to their low surface area and small tip diameters, which are suitable for recording single unit activity. Lowering the electrode impedance, but preserving the small diameter, would provide a number of advantages, including reduced stim...

Chromium, especially chromium (VI), is the main pollutant of the tannery and electroplating industries. Cr (VI) is said to be a hazardous pollutant as it is highly toxic, mutagenic as well a carcinogen. Cr (VI) is mobile as it is soluble in nature. In our present study, indigenous bacteria that are tolerant to high concentrations of Cr (VI) were isolated from chromium contaminated electroplatin...

rocess and quality control are exP tremely important in achieving optimum production and they have a special place in continuously operating processes. Real-time process monitoring is the comerstone of maintaining an efficient electroplating process. For the steel industry, zinc and nickel electroplating processes used for anticorrosion treatmentl must be monitored to maintain certain standards...

Infection-related complications have been a critical issue for the application of titanium orthopedic implants. The use of Ag nanoparticles offers a potential approach to incorporate antimicrobial properties into the titanium implants. In this work, a novel and simple method was developed for synthesis of Ag (II) oxide deposited TiO2 nanotubes (TiNTs) using electrochemical anodization followed ...