NiCu alloy nanowires arrays were embedded into the anodic aluminum oxide (AAO) template by ac-pulse electrodeposition. Different off-time were used in electrolyte with constant concentration of Ni and Cu and acidity of 3. The effect of deposition parameters on alloy contents was investigated by studying the microstructure and magnetic properties of as-deposited NiCu alloy nanowires. Atomic forc...

Porous Ag/TiO2/Au coatings with excellent multipactor suppression were prepared by fabrication of porous Ag surface through two-step wet chemical etching, synthesis of TiO2 coatings by electroless-plating-like solution deposition and deposition of Au coatings via electroless plating. Porous structure of Ag surface, TiO2 coatings on porous Ag surface and Au coatings on porous Ag/TiO2 surface wer...

The transition metal nitrides like titanium nitride exhibit very interesting color variation properties depending on the different plasma deposition conditions using cylindrical magnetron sputtering method. It is found in this deposition study that nitrogen partial pressure in the reactive gas discharge environment plays a significant role on the color variation of the film coatings on bell-met...

We present a microfluidic technique for precision patterning thin-film metals (silver and gold) without the need for photolithography. This technique is employed for the fabrication of metal resistors that are subsequently utilized as temperature sensors, strain gauges, and fluid flow sensors. Patterns of thin film metal are fabricated by premixing and flowing electroless silver or gold plating...

Three-dimensional electrodes that are controllable over multiple lengthscales are very important for use in bioanalytical systems that integrate solid-phase devices with solution-phase samples. Here we present a fabrication method based on all-solution-processing and thin film wrinkling using smart polymers that is ideal for rapid prototyping of tunable three-dimensional electrodes and is exten...

Vertically aligned silicon nanowires (SiNWs) were cost-effectively formed on a four-inch silicon wafer using a simple room temperature approach, i.e., metal-assisted electroless etching. Tapering the NWs by post-KOH dipping achieved separation of each NW from the bunched NW, resulting in a strong enhancement of broadband optical absorption. As electroless etching time increases, the optical cro...

FexNi100-x thin films were deposited on conductive (Cu) and non-conductive (Pd activated glass) substrate using an electroless, polyol method. The stoichiometry of film composition, as compared to the precursor concentration, strongly depended on the substrate position. When the substrate was immersed in the refluxing solution, Fe-deficient films were deposited. However Fe-rich films were synth...

We report the experimental observation of traveling fronts during the electroless deposition of copper on passive steel substrates. The low-carbon steel samples are passivated in nitric acid prior to the plating experiment, thus creating a thin, protective oxide layer on the steel surface. The deposition experiments are carried out from slightly acidic (pH 3.2) copper sulfate solution and coppe...

Electrophysiological Sensors In article number 2200342, Ryan Kaveh, Ana C. Arias, and co-workers present a fabrication method for rapidly producing low impedance, anatomically fit dry electrodes that do not require hydrogels. By using electroless copper gold plating with 3D printing, biocompatible can be optimized individuals at fraction of the cost existing vacuum deposition-based techniques.